manual

a s s e m b l y i n s t r u c t i o n s

b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m

Step 6

Optional fabric speaker or glass insert panel

Avion’s drawer and door fronts feature removable/replaceable

panel inserts to permit customization of your cabinet’s appearance

and utility. (Contact BDI Customer Service at customerservice@

bdiusa.com)

Installing optional panel inserts is quick and easy:

1. From the inside of the door, and starting at one corner of

the pre-installed Glass or Speaker panel insert, carefully pull away

all four sections of the panel retention trim, running along the

perimeter of the insert. (Use a blunt, tapered object or your finger

to start removing the rubber material.)

2. Once the trim material is completely pulled away, remove the

pre-installed panel insert and replace it with the desired panel

insert.

3. Re-install the trim, pressing it carefully back into the groove

around the new panel insert, section by section, to complete the

panel insert installation.

Step 5

Install both Back Panels (M) to the backside of the cabinet.

*Note: Velcro straps are included as wire management for your

convenience.

a. Remove rubber trim and

glass panel.

b. Replace insert panel