Assembly Instructions

2
a s s e m b l y i n s t r u c t i o n s
b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m
F
Completed base
assembly
Step 3
Build and Install Base Assembly
Using the Hollow Bolt Wrench (C), remove the four
(4) pre-installed Hollow Bolts (D) from Metal Leg (H).
screw the Metal Rail (G) to the top of Metal Leg (H)
with Hollow Bolts (D).
Step 4
Carefully lay Assembled Cabinet (F) back-side
down. Using one of 4mm Hex Drivers (B), attach
the completed base assembly to the bottom of the
Assembled Cabinet (F) with 1/4”-20 x 2” Machine
Screws (E). *Note: Each of the metal legs has levelers
that can be adjusted from inside the cabinet using one of
the 4mm Hex Drivers (B).
E x 8
H
H
D
G
G
Detail view of Hollow
Bolts (D) connecting the
Metal Rail (G) to the top
of Metal Leg (H).
D
G
H
H
Completed base assembly
NOTE: Make sure
that the larger
bolt opening on
Metal Rail (G)
faces toward the
floor.