Owner's Manual

ManualsBrandsBDI ManualsEntertainment FurnitureAvion 8929 Series II

Your Avion

Home Theater Furniture is engineered for easy assembly.

Carefully follow this procedure to prevent any damage.

Placement and Maintenance

Avion

Home Theater Furniture is designed for indoor use on level floors.

Clean glass with glass cleaner, and steel parts and wood veneer with a

moist cloth.

Step 1

Unpack and Identify

Unpack and identify the components at left. Note that some components

are shipped inside the cabinet. The assembly workspace should be a non-

marring surface such as carpet. For missing hardware pieces, please

contact BDI Customer Service at customerservice@bdiusa.com. For all

other concerns, please contact your BDI Retailer.

Step 2

Install Handles

Install Handles (K) on the doors and drawers using the

M4 x 25mm

Screws (J) and the Phillips Screwdriver (A) supplied.

Component List

C - Hollow Bolt Wrench

x 1

F - Assembled Cabinet

x 1

E - 1/4”-20 x 2”

Machine Screw x 10

D - Hollow Bolts x 4

Pre-installed on

Metal Legs (H)

G - Metal Rail x 2

J -M4 x 25mm Screws

x 8

B - 4mm Hex Drivers

x 2

A - Phillips Screwdriver

x 1

I - Wood Leg x 1

K - Handle x 4

L - Adjustable Shelf

x 2

M - Back Panel x 2

These distinctive product configurations are protected by US and international

patents, trade dress, and/or copyright laws. “Avion” and BDI are trademarks of

Made in China. 89278929REV03042010v6

A VION

8927AND8929

ASSEMBLY INSTRUCTIONS

BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM

H - Metal Leg x 2

Summary of content (5 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS AVION ® 8 9 2 7A N D 8 9 2 9 BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM Your Avion® Home Theater Furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage.
PAGE 2
Step 3 Build and Install Base Assembly Using the Hollow Bolt Wrench (C), remove the four (4) pre-installed Hollow Bolts (D) from Metal Leg (H). screw the Metal Rail (G) to the top of Metal Leg (H) with Hollow Bolts (D). D G G H H Completed base assembly NOTE: Make sure that the larger bolt opening on Metal Rail (G) faces toward the floor. H D G Detail view of Hollow Bolts (D) connecting the Metal Rail (G) to the top of Metal Leg (H). Step 4 Carefully lay Assembled Cabinet (F) back-side down.
PAGE 3
Step 5 Install Wood Leg (I) at rear-center edge of cabinet bottom using two (2) 1/4”-20 x 2” Machine Screws (E) and one of 4mm Hex Drivers (B). Wood Leg (I) must straddle the rearmost Metal Rail (G), as indicated in drawing. NOTE: One (1) fastening screw is installed from cabinet interior. The other fastening screw is installed from cabinet exterior, near back edge of cabinet, and is most easily installed with cabinet in upright position.
PAGE 4
Step 7 Optional fabric speaker or glass insert panel Avion’s drawer and door fronts feature removable/replaceable panel inserts to permit customization of your cabinet’s appearance and utility. (Contact BDI Customer Service at customerservice@bdiusa.com) Installing optional panel inserts is quick and easy: 1.
PAGE 5
Thank you for choosing BDI. Your BDI home theater cabinet is engineered to include a range of adjustments. Please read and retain this guide so that you can fully enjoy the look and use of your cabinet for years to come. Unless manual leveling is required or you wish to prevent the cabinet from rolling, you may prefer to keep the cabinet’s levelers up and off the floor.