Assembly

ManualsBrandsBDI ManualsTV Stands & Entertainment CentersBDI Avion 8927 II Cherry TV Stand

Your Avion

Home Theater Furniture is engineered for easy

assembly. Carefully follow this procedure to prevent any

damage.

Placement and Maintenance

Avion

Home Theater Furniture is designed for indoor use

on level floors. Clean glass with glass cleaner, and steel

parts and wood veneer with a moist cloth.

Step 1

Unpack and Identify

Unpack and identify the components at left. Note that some

components are shipped inside the cabinet. The assembly

workspace should be a non-marring surface such as carpet.

For missing hardware pieces, please contact BDI Customer

Service at customerservice@bdiusa.com. For all other

concerns, please contact your BDI Retailer.

Step 2

Install Handles

Install Handles (K) on the doors and drawers using the

M4 x 25mm Screws (J) and the Phillips Screwdriver (A)

supplied.

Component List

C - Hollow Bolt Wrench

x 1

F - Assembled Cabinet

x 1

E - 1/4”-20 x 2”

Machine Screw x 10

D - Hollow Bolts x 4

Pre-installed on

Metal Legs (H)

G - Metal Rail x 2

J -M4 x 25mm Screws

x 8

B - 4mm Hex Drivers

x 2

A - Phillips Screwdriver

x 1

I - Wood Leg x 1

K - Handle x 4

L - Adjustable Shelf

x 2

M - Back Panel x 2

These distinctive product congurations are protected by US and

international patents, trade dress, and/or copyright laws. “Avion”

and BDI are trademarks of Becker Designed, Inc. All Rights

Made in China. 050109v1

A v i o n

8927a n d 8929

a s s e m b l y i n s t r u c t i o n s

b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m

H - Metal Leg x 2

Summary of content (5 pages)

PAGE 1
a s s e m b ly Avion instructions ® 8 92 7and 8929 Component List A - Phillips Screwdriver x1 bdiusa.com customerservice@bdiusa.com Your Avion® Home Theater Furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Placement and Maintenance Avion® Home Theater Furniture is designed for indoor use B - 4mm Hex Drivers on level floors. Clean glass with glass cleaner, and steel x2 parts and wood veneer with a moist cloth.
PAGE 2
Step 3 Build and Install Base Assembly Using the Hollow Bolt Wrench (C), remove the four (4) pre-installed Hollow Bolts (D) from Metal Leg (H). screw the Metal Rail (G) to the top of Metal Leg (H) with Hollow Bolts (D). D G G H H Completed base assembly NOTE: Make sure that the larger bolt opening on Metal Rail (G) faces toward the floor. H D G Detail view of Hollow Bolts (D) connecting the Metal Rail (G) to the top of Metal Leg (H). Step 4 Carefully lay Assembled Cabinet (F) back-side down.
PAGE 3
Step 5 Install Wood Leg (I) at rear-center edge of cabinet bottom using two (2) 1/4”-20 x 2” Machine Screws (E) and one of 4mm Hex Drivers (B). Wood Leg (I) must straddle the rearmost Metal Rail (G), as indicated in drawing. I NOTE: One (1) fastening screw is installed from cabinet interior. The other fastening screw is installed from cabinet exterior, near back edge of cabinet, and is most easily installed with cabinet in upright position.
PAGE 4
Step 7 Optional fabric speaker or glass insert panel Avion’s drawer and door fronts feature removable/ replaceable panel inserts to permit customization of your cabinet’s appearance and utility. (Contact BDI Customer Service at customerservice@bdiusa.com) Installing optional panel inserts is quick and easy: 1.
PAGE 5
Thank you for choosing BDI. Your BDI home theater cabinet is engineered to include a range of adjustments. Please read and retain this guide so that you can fully enjoy the look and use of your cabinet for years to come. Unless manual leveling is required or you wish to prevent the cabinet from rolling, you may prefer to keep the cabinet’s levelers up and off the floor.