Assembly

3
a s s e m b l y i n s t r u c t i o n s
b d i u s a .c o m c u s t o m e r s e r v i c e @b d i u s a .c o m
Completed base
assembly
Step 5
Install Wood Leg (I) at rear-center edge of cabinet
bottom using two (2) 1/4”-20 x 2” Machine Screws
(E) and one of 4mm Hex Drivers (B). Wood Leg (I)
must straddle the rearmost Metal Rail (G), as indicated
in drawing.
NOTE: One (1)
fastening screw is
installed from cabinet
interior. The other
fastening screw is
installed from cabinet
exterior, near back
edge of cabinet, and
is most easily installed
with cabinet in upright
position.
E
E
I
I
Step 6
Install both Back Panels (M) to the backside of the
cabinet. *Note: Velcro straps are included as wire
management for your convenience.
Optional Flat Panel TV Mount
This BDI cabinet is compatible with BDI’s Flat-Panel TV
Mount #9970 (sold separately), with the following features:
attaches easily to the back of the cabinet •
accommodates most TVs up to 60”, 180 lbs •
swivel allows for rotating for optimal viewing •
allows adjustable TV mounting height •
accepts and route cables to and from the TV •
For more information, visit www.bdiusa.com