Installation & Assembly

DINO 1343

COFFEE TABLE

DINO 1344

SMALL COFFEE TABLE

DINO 1347

END TABLE

A - Hex Wrench 4mm

x 1

C - 1/4-20 x 1/2

Flat Head Screws

4mm Socket Drive

x 3

B - 1/4-20 x 3/4

Flat Head Screws

4mm Socket Drive

x 6

G - Felt Pads x 3

H - Felt O-Rings x 3

DINO TABLES

These distinctive product configurations are protected by US and international

patents, trade dress, and/or copyright laws.

BDI are trademarks of Becker Designed, Inc.

1343 1344 1347 Revision: 02-23-11

Component List

DINO TABLES are engineered for easy assembly. Carefully follow this procedure to prevent any damage.

Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.

For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com.

For all other concerns, please contact your BDI Retailer.

1343 1344 1347

ASSEMBLY INSTRUCTIONS

BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM

Placement and Maintenance

DINO TABLES are designed for indoor use on level floors. Clean glass with glass cleaner, and shelf with a moist cloth.

D - Legs x 3

E - Shelf x 1

F - Glass x 1

PAGE 1
ASSEMBLY INSTRUCTIONS DINO TABLES 1343 1344 1347 BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM Placement and Maintenance DINO TABLES are designed for indoor use on level floors. Clean glass with glass cleaner, and shelf with a moist cloth. DINO 1343 COFFEE TABLE DINO 1344 SMALL COFFEE TABLE DINO 1347 END TABLE Component List DINO TABLES are engineered for easy assembly. Carefully follow this procedure to prevent any damage. Unpack and identify the components.
PAGE 2
Step 1 - Attach Legs to Shelf Place long edge of Shelf (E) on soft surface in order to prevent damage. Attach Legs (D) to Shelf (E) using Screws (B) and tighten using Hex Drive Wrench (A). Attach first Leg (D) to middle point of Shelf (E). Optional: If placed on hard floor, attach Felt Pads (G) to bottom of Legs (D). D Attach 1st G D G A B B D D G E Shelf Place long edge on soft surface in order to prevent damage. G Step 2 - Attach Glass to Legs Attach Felt O-Rings (H) to Glass Pucks.