Assembly Instructions

ManualsBrandsBDI ManualsFurniture & MattressesBDI Centro 6401 Satin White Desk

These distinctive product conﬁgurations are protected by US and international patents, trade dress, and/or

Made in Taiwan. 12.2.2015 V2

T1 4mm Hex Wrench

C5 Drawer Liner x 1

C1 Glass Panel x 1

C3 Front Panel x 1

C2 Back Panel x 1

C9 Right Leg x 1

C8 Left Leg x 1

C4 Desk Frame x 1

C7 Lower Trough x 1

C6 Upper Trough x 1

H1 1/4-20 x 15 mm Screw x 16

H8 1/4-20 x 61 mm Screw x 5

H9 Leveler Glide x 4

H10 Bumper x 4

Product Registration

Registering your new BDI product allows us to send you important

product updates, service information and helpful hints related to your

BDI products. Register today and you will be entered to win free a BINK

table from BDI. www.bdiusa.com/product-registration/

Placement and Maintenance

Centro

™

Office furniture is designed for indoor use on level floors. Clean

glass with glass cleaner, and steel parts and wood veneer with a moist

cloth.

Your Centro

™

Office furniture is engineered for easy assembly. Carefully

follow this procedure to prevent any damage.

Do not use power tools for assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly workspace

should be a non-marring surface such as carpet. For missing hardware

pieces, please contact BDI Customer Service at customerservice@

bdiusa.com. For all other concerns, please contact your BDI retailer.

bdiusa.com

customerservice@bdiusa.com

CENTRO

6401

DESK

Summary of content (8 pages)

PAGE 1
CENTROTM 6401 bdiusa.com customerservice@bdiusa.com DESK Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today and you will be entered to win free a BINK table from BDI. www.bdiusa.com/product-registration/ Placement and Maintenance Centro™ Office furniture is designed for indoor use on level floors.
PAGE 2
Step 1 - Install Leveler Glides H9 to the bottom of Left Leg C8 and Right Leg C9. H9 (x4) C8 C9 2 CENTRO 6401 DESK bdiusa.com customerservice@bdiusa.
PAGE 3
Step 2 - Attach Left Leg C8 to Desk Frame using Screw H1 and Hex Wrench. H1 (x4) Step 3 - Attach Right Leg C9 to Desk Frame using Screw H1 and Hex Wrench. H1 (x4) 3 CENTRO 6401 DESK bdiusa.com customerservice@bdiusa.
PAGE 4
Step 4 - Adhere Bumper H10 to top surface of Upper Trough C6. H10 (x4) Step 5 - Attach Upper Trough C6 to inside of Left and Right Leg using Screw H1 and Hex Wrench. H1 (x4) 4 CENTRO 6401 DESK bdiusa.com customerservice@bdiusa.
PAGE 5
Step 6 - Attach Lower Trough C7 to inside of Left and Right Leg using Screw H1 and Hex Wrench. H1 (x4) 5 CENTRO 6401 DESK bdiusa.com customerservice@bdiusa.
PAGE 6
Step 7 - With the help of another person, gently lower assembly onto Glass Panel. Both parts are upside down for the assembly process. Step 8 - Fasten into place using Screw H8 and Hex Wrench. DO NOT OVERTIGHTEN! Upon completion, turn desk upright onto its base. H8 (x5) 6 CENTRO 6401 DESK bdiusa.com customerservice@bdiusa.
PAGE 7
Step 9 (optional) - Attach Magnets to AC power strip/surge protector (not included) Remove Magnets from the Upper Trough C6. Peel film from side of the Magnets and attach to clean, dry back side of AC power strip (not included). Cleaning of power strip surface with rubbing alcohol will ensure best adhesive bond. **UNPLUG POWER STRIP FROM POWER SOURCE BEFORE CLEANING** 7 CENTRO 6401 DESK bdiusa.com customerservice@bdiusa.
PAGE 8
Step 10 - Install Front Panel C3 as shown. The rear side of panel has pre-installed magnets that hold panel into position. Note: The Centro Desk is designed to permit placement in front of an electrical outlet for easier wiring access. Optional The Back Panel C2 is provided to conceal wire management if desk is located in the middle of a room. 8 CENTRO 6401 DESK bdiusa.com customerservice@bdiusa.