Instruction Manual

bdiusa.com
[e-mail]
COSMO 5720
BAR
2
Step 2 - Base Assembly
Position base frame C1 on the floor with tabs facing up. Slide both top connector tubes C2 onto the 2
large U shaped tabs of base frame C1 making sure the holes are facing inside. Slide both bottom con-
nector tubes C2 onto the 2 small U shaped tabs of base frame with holes facing down. Attach connec-
tor tubes using 8 screws H1. Sleeve the other base frame C1 over the assembly as shown below and
tighten all 16 screws H1 with hex wrench T1.
C2
C2
C3
C3
H1
T1
H1 x 16
C1
C1
H1
H1
H1
H1
H1
H1
H1