Instruction Manual

bdiusa.com
[e-mail]
COSMO 5720
BAR
7
Step 8 - Light Installation
Find the rechargeable strip light H4. Using the Micro HDMI/USB charge cord H5, charge the light for
6 hours. Once charged, install it onto the metal strip (it is held with magnets) located in the angled recess
towards the top front of the cabinet. Make sure the proximity sensors are facing forward and the light
switch is turned on. The light is designed to turn off automatically when the cabinet doors are closed.
Step 9 - Drawer Liner Installation / Magnetic Door Catch
Open the push-open drawer and install middle drawer liner C6 and both side drawer liners C7.
Using a slotted screwdriver, unscrew the magnetic door catches a few turns until they make contact
with and hold the doors shut.
H4 Rechargeable
Strip Light
C6
C7
C7
Proximity Sensors
On/Off
Micro HDMI / USB
charge cord H5