HIGH PERFORMANCE FURNITURE FOR YOUR HOME THEATER Deploy TM Assembly Instructions
Deploy™ Home Theater Furniture Your Deploy™ Home Theater Furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Placement and Maintenance Deploy™ Home Theater Furniture is designed for indoor use on level floors. Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth. Assembled Frame x 1 Sliding Back Panel x 1 Designed by BDI Design Studio.
Step 2 Insert back panel. Once the metal legs are opened, slide the back panel down into the “U” channel, and tighten the four threaded knobs to secure back panel into position. Note* threaded knobs are included with the assembled frame. Step 3 First, install the rubber bumper inserts to all of the hole locations on the center shelf support. Second, install the center glass shelf support by placing on the previously installed shelf pins. Third, install the glass shelves.
Step 4 Velcro straps and small wood screws are supplied, and can be used for organizing cable management. On the rear side of the back panel, are 9 pre-drilled holes for installing the Velcro straps using a Phillips screw driver. Double Wide TV Stand Model 9624 Cherry Triple Wide TV Stand Model 9629 Cherry 19” H x 49” W x 19.5” D 19” H x 61” W x 19.5” D For flat panel TVs up to 50”, or rear projection TVs up to 45”. For flat panel TVs up to 62”, or rear projection TVs up to 62”.