Assembly Instructions

bdiusa.com

customerservice@bdiusa.com

Product Registration

Registering your new BDI product allows us to send you important

product updates, service information and helpful hints related to your

BDI products. Register today and you will be entered to win free a BINK

table from BDI. www.bdiusa.com/product-registration/

Placement and Maintenance

Kronos

™

Office furniture is designed for indoor use on level floors.

Clean surfaces with a moist cloth.

Your Kronos

™

Office furniture is engineered for easy assembly. Carefully

follow this procedure to prevent any damage. Do not use power tools for

assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly workspace

should be a non-marring surface such as carpet. For missing hardware

pieces, please contact BDI Customer Service at:

customerservice@bdiusa.com.

For all other concerns, please contact your BDI retailer.

A1 Cabinet

C6 File Bar Clip x 2

C8 Locking Swivel

Caster x 4

C9 Fixed Caster x 1

H5 Phillips Machine

Screw x 20

These distinctive product conﬁgurations are protected by US and international patents, trade dress, and/or

Made in China. 05.10.2017

KRONOS

6717

Multifunction Cabinet

Tool Required:

Phillips screwdriver

C5 Large File Bar x 1

PAGE 1
KRONOSTM 6717 Multifunction Cabinet bdiusa.com customerservice@bdiusa.com Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today and you will be entered to win free a BINK table from BDI. www.bdiusa.com/product-registration/ Tool Required: Phillips screwdriver Placement and Maintenance Kronos™ Office furniture is designed for indoor use on level floors.
PAGE 2
Step 2 - Lay Cabinet on its back side. Attach Casters to Cabinet using Screws H5 and tighten with a Phillips screwdriver. H5 C8 C9 C9 Step 3 - Adjust shelf if needed The shelf position can be adjusted by unscrewing the 4 shelf pins and moving them up or down to the desired level. Adjustable shelf Pull-out shelf for printer 2 CENTRO 6407 MOBILE FILE PEDESTAL bdiusa.com customerservice@bdiusa.
PAGE 3
Step 4 - File Bar Installation (Letter File) For letter files facing sideways, attach File Bar Clip C6 to both ends of Large File Bar C5 as shown. Place the file bar assembly in the notches located on the left and right drawer side panels. For legal files, remove the Large File Bar and hang file folders on the front and rear rails. C6 C5 3 CENTRO 6407 MOBILE FILE PEDESTAL bdiusa.com customerservice@bdiusa.