Instructions Manual

bdiusa.com
[e-mail]
MARGO 5201
Shelf
6
3/4"
19mm
Step 8 - Door Stops
Your Margo Console sliding door has 2 green door stops located at each end of the upper aluminum track.
The door stops are preset to allow the door to stop in the correct position. If your door(s) do not stop at the
preset position indicated below, it is likely they may have moved during transit and handling. You will need
to reposition and tighten the door stop using Small Hex Wrench T2. The end of the door stops should be
exactly 19mm (3/4") away from the end of the track.
Edge of green door stop
should be 19mm (3/4") away
from end of track.
Use Small Hex Wrench T2
to tighten door stop in correct
position.
Correct Door Stop
Position
Incorrect Door Stop
Position
Door Stop
T2