Instruction Manual

bdiusa.com
[e-mail]
MILO 1055
MEDIA TABLE
3
Step 3 - Attach Post and Base
Slide either end of the post 2A onto the stem of mounting plate A1. Place the stem of base A3 into the
opposite end of the post A2 and secure in place with 1 hand. With your other hand, slide 2 threaded rods H2
into the channels that run through post A2 and into the holes on the mounting plate A1. Tighten with hex
wrench T1.
T1
A1
H2 x 2
A2
A3
Stem