Instructions

ManualsBrandsBDI ManualsCoffee & Cocktail TablesBDI Muv 1252 Ebonized Ash Coffee Table

C1 Top Panel x 2

A1 Glass Panel x 2

C2 Middle Panel x 2

C3 Bottom Panel x 2

H2 Swivel Locking

Casters x 8

Product Registration

Registering your new BDI product allows us to send you important

product updates, service information and helpful hints related to your BDI

products. Register today, and you will be entered to win free a

BINK table from BDI: www.bdiusa.com/register

Placement and Maintenance

Your Müv Table is designed for indoor use on level floors.

Clean glass with glass cleaner and wood veneer with a moist cloth.

Müv is engineered for easy assembly. Carefully follow this procedure to

prevent any damage. Do not use power tools for assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly workspace

should be a non-marring surface such as carpet. For missing hardware

pieces, contact BDI Customer Service at: customerservice@bdiusa.com.

For all other concerns, please contact your BDI retailer.

bdiusa.com

customerservice@bdiusa.com

These distinctive product conﬁgurations are protected by US and international patents, trade dress, and/or

Made in China. 5.17.2019 V5

MÜV

™

1252

Tables

Tool Required:

Phillips Screwdriver

H1 M4 x 12mm

Pan Head Screw x 32

T1 Hex Driver x 1

Component List

Summary of content (5 pages)

PAGE 1
MÜV™ 1252 Tables bdiusa.com customerservice@bdiusa.com Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today, and you will be entered to win free a BINK table from BDI: www.bdiusa.com/register Placement and Maintenance Your Müv Table is designed for indoor use on level floors. Clean glass with glass cleaner and wood veneer with a moist cloth.
PAGE 2
Step 2 - Place the top panel C1 (which has a finger groove around the bottom edge as shown). Remove the protective film from glass panel A1. Slide one edge of glass panel A1 (with aluminum rail) into the matching slot on bottom side of top panel C1. If the aluminum channel is tight, brace the front edge of the top panel. Wall Finger Groove A1 Glass Panel C1 Top Panel Step 3 - Take the middle panel C2 and position it as shown until the connectors engage with each other. Make sure the edges are flush.
PAGE 3
Step 4 - Place hex driver T1 into the access holes at a 45 degree angle and tighten the connectors by turning clockwise about 1/4 turn until tight. You may need to wiggle the hex driver until the end of the driver engages with the connecting hardware. Tighten all 4 connectors. 4 access holes to tighten connectors C2 Middle Panel T1 Hex Driver Step 5 - Orient the bottom panel C3 as shown and slide it so that the aluminum channel goes into the slot on bottom panel C3.
PAGE 4
Step 6 - Tighten the 4 miter joint connectors by inserting hex driver T1 into the slanted holes and turning clockwise until tight. T1 Hex Driver (45˚ angle) Step 7 - Attach each swivel locking caster H2 with pan-head screws H1 and a Phillips screwdriver. Repeat for all 4 casters. H1 x 4 H2 Phillips Driver (not included) 4 MÜV 1252 Table H1 x 16 bdiusa.com customerservice@bdiusa.
PAGE 5
Step 8 - Repeat steps 2-7 and assemble the other half of the table. Step 9- With help from another person, carefully position the tables onto their wheels. Step 10 - Your Müv Coffee Table comes with lockable casters. Raise the tab to lock, lower the tab to unlock. Caution! • The middle panels have hidden magnets to help align the 2 halves of your Müv table. • Keep sensitive electronic equipment and fingers out of the path of the magnets. Hidden Magnets Lockable Casters 5 MÜV 1252 Table bdiusa.