SEMBLANCE MODULAR SYSTEM MAIN ASSEMBLY INSTRUCTIONS To view the Semblance assembly video, scan this code with a QR reader or visit http://www.bdiusa.com/semblance/ assembly.shtml BDIUSA.
Semblance System Your SEMBLANCE System Furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Placement and Maintenance SEMBLANCE System Furniture is designed for indoor use on level floors. Clean glass with glass cleaner, steel parts and wood veneer with a moist cloth. You will need: 32" Semblance Wall Bracket Template This Template helps locate the various positions of the second Wall Bracket.
Locate the Package Reference Booklet See page 2 to identify all components. For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com. For all other concerns, please contact your BDI Retailer. See page 3 for a representation of your Package containing critical information for its assembly. Model Details Component List x2 15010 Jx2 Kx4 x2 Single Spacing Wall Bracket x 2 Placement & Details 27.25 in 69.3 cm to Bracket Template TOP VIEW Lx8 15011 15.625 in 39.
WALL SYSTEM Assembly Sequence Overview F Level each Panel as it is being assembled. 4 Use Leveler Wrench (F) to adjust the height of the Panel, if necessary.
Plan Ahead. To plan unit placement, refer to Package Reference Booklet for critical dimensions. ! The assembled unit CANNOT be moved, so carefully plan the placement of the unit prior to building. 1: See the Bracket Template spacing dimension on page 3 of the Package Reference Booklet. Using the provided spacing dimension, measure from the edge of where the left End Panel will be placed and mark the wall to indicate placement of the bracket template. Model Details x2 Single Spacing 27.25 in 69.
2: B Align the left side of the Bracket Template with the wall mark. Level the Template with the string, and insert Wall Bracket (B) into its designated groove. Mark the wall at bracket holes to locate fastener locations. 3: B 4: Attach first Bracket to the wall using the appropriate attachment method illustrated below.
5: Refer to Package Reference Booklet for the number of recommended Wall Brackets. Model Details x2 Single Spacing 27.25 in 69.3 cm to Bracket Template x2 TOP VIEW If 1 Bracket, skip to step 9 on page 8. If 2 Brackets, proceed to step 6 and finish the Wall System section of the instructions. 15.625 in 39.
7: Slip the Template over the attached Bracket (B). Level the Template with the string and mark second Bracket hole locations on wall. B 8: Refer to Step 4 on page 6 to attach second Bracket (B) 9: Bring Divider Panel up to Bracket (B) and slide Metal Insert (A) into Bracket with the long flange exposed as shown. Attach Metal Insert (A) to top of Panel with Screws (E).
10: TOP VIEW 90 For next step turn to SHELF ASSEMBLY PAGE 14 WALL SYSTEM 9
ROOM DIVIDER Assembly Sequence Overview F Level each Panel as it is being assembled. 10 Use Leveler Wrench (F) to adjust the height of the Panel, if necessary.
Plan Ahead. To plan unit placement, refer to Package Reference Booklet for critical dimensions. ! The assembled unit CANNOT be moved, so carefully plan the placement of the unit prior to building. 1: Use the right edge of the Bracket Template to locate the right side of the attached End Panel.
2: Leveling the Template with the string, insert Wall Bracket (B) into designated groove. 3: Mark Bracket hole location on wall and mark the left edge of the Template on the wall. B B 4: Flip Template over and align right side of Template with wall mark to locate second Bracket position. Mark second Bracket hole location lightly on wall and then install Bracket.
5: E Refer to Step 4 on page 6 to attach both Brackets. G A A B B 6: Bring End Panel up to attached Bracket (B) and slide Metal Insert (A) into Bracket (B) with the short flange exposed as shown. Attach Metal Insert (A) to top of Panel with Screws (E). 7: d Make sure the Panel’s ends are the same distance from the wall.
SHELF ASSEMBLY Model Details x2 Single Spacing 27.25 in 69.3 cm to Bracket Template x2 TOP VIEW 15.625 in 39.7 cm x2 100 in 254 cm x6 Package Reference Sample Hole Spaces 4 6 x6 1: Refer to Package Reference Booklet for the hole positions of the Shelf Screws (E).
3: Use the appropriately sized Shelf Frame as a spacing guide for the next Panel. Lay the Frame on the floor beside the fixed Panel and bring the next Panel up to the Shelf Frame. Refer to the Package Reference Booklet for spacing of each set of Panels.
5: 6: Slide Metal Insert (A) into attached Bracket (B) with the long flange exposed as shown. Attach Metal Insert (A) to top of Panel with Screws (E). Gently tighten all Shelf Frames. A B 7: Install Glass Shelves. Micro-etched face up.
CABINET ASSEMBLY Model Details x2 Single Spacing 27.25 in 69.3 cm to Bracket Template x2 TOP VIEW 1: Refer to Package Reference Booklet for Cabinet Bracket positions. 15.625 in 39.7 cm x2 100 in 254 cm x6 Package Reference Sample Hole Spaces 4 6 x6 6 2: Screw Cabinet Brackets (J) into determined inserts.
3: Slide Cabinet in between panels, well above the Bracket, and carefully lower into place so that Cabinet Bracket fits into the recess on cabinet’s bottom side.
4: K 5: L After completing the assembly of Bracketed Panels, repeat Shelf and Cabinet Assembly for each consecutive Panel until your Package is complete.
ADJUST DOOR HINGES (IF NEEDED) If the cabinet’s door appears out of alignment, this can be corrected with minor adjustment on each door. *2. Because these hinges are infinitely adjustable, adjusting one hinge element can sometimes cause the need for adjustments to other elements. But with a few adjustments, you can modify the orientation of the cabinet door to make sure that it hangs evenly. 3. 2. 1. *2. 3. 1.
