ATT E N T ION : ® SEQUEL OFFICE PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY. Sequel Peninsula 6018 Assembly and Placement Information PENINSULA BDIUSA.
desk and return
features Thanks for purchasing the Sequel System. Before you begin setting up the Sequel System Components, it is imperative that you read the Consumer Considerations section on the next page.
Consumer Considerations Placement Once the Sequel System is fully assembled, it cannot be moved. Make all positioning adjustments prior to final assembly. Plan your space. Forethought is essential in determining the placement of each component. Using a measuring tape, determine how much floor space each unit will require. A cardboard template has been provided in order to help aid this process. Get someone to help you.
This page outlines two scenarios: Scenario 1 If cabinet is NOT blocking an AC power outlet, it may be positioned close to the wall. Power Consumer Considerations Power & Placement Top View Scenario 2 If cabinet is going to block an AC power outlet, position cabinet approximately 3” from wall. Low profile extension plugs may be used to reduce the amount of space required in this application.
step 1 Peninsula Model 6018 Your SEQUEL® 6018 Furniture is engineered for easy assembly. Carefully follow this procedure to prevent any damage. Do not use power tools for assembly of this product. NOTE: This instruction sheet is intended for both the Left and Right Peninsula 6018; the Right is shown for illustration. Placement and Maintenance SEQUEL® 6018 Furniture is designed for indoor use on level floors. Clean glass with glass cleaner, and steel parts and wood veneer with a moist cloth.
step 2 Kx6 Lx6 Wire Management (Optional) For the purpose of wire management, use Plastic Clip (L) to install Velcro Straps (K) to outside perimeter of Desk Frame Assembly (G).
step 3 A Cx4 Attach Leg to Desk Frame While the second person holds the desk frame on its side position, attach Round Leg (H) to the underside of Desk Frame Assembly (G) using the Hex Wrench (A) and Machine Screws (C).
step 4 A Dx2 Attach Desk Frame to Cabinets With the help of another person, carefully lower Desk Frame Assembly (H) onto the adjacent cabinets (Sequel Models 6014, 6015, 6016, or 6017). Adjust frame so that the holes are aligned with the threaded inserts on top of the cabinets. Once holes are aligned, install Flat Head Screws (D) using Hex Wrench (A).
step 5 step 4 Bumpers Install Rubber Stem Bumpers (E).
step 6 A Fx4 Install Glass With the help of another person, carefully lower the Glass Top (I) onto the frame. Register the steel discs on underside of glass into the holes on the frame; then attach the glass using Machine Screws (F) and Allen Wrench (A).
step 7 Plan View CAUTION: When setting up multiple workstations, leave at least 1" between each station. Failure to do so may result in damage to tempered glass work surfaces. 1" Install Glass Carefully lower the glass panel onto the Sequel Cabinet (Refer to individual cabinet instructions). BDIUSA.COM 12 Designed by Matthew Weatherly. These distinctive product configurations are protected by US and international patents, trade dress, and/or copyright laws.
