SERIF™ LIFT 1045 LAPTOP TABLE INSTRUCTION MANUAL LET’S GET STARTED.
Congratulations on the purchase of your Serif Lift Laptop Table 1045 from BDI. Your lift laptop table has been designed to provide a lifetime of enjoyment. This manual will provide you with assembly instructions and other helpful information that will ensure that you get the most out of your Laptop Table. Please save it for future reference. Your Serif Lift laptop table has been engineered for simple assembly. Please follow these directions carefully to prevent any damage.
HARDWARE AND COMPONENTS Unpack and identify the parts listed below. The assembly workspace should be a non-marring surface such as carpet. For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com. Do not use power tools for assembly of this product. For all other concerns, please contact your BDI retailer.
ASSEMBLY STEP 1. ATTACH TOP TO LIFT COLUMN Place (C1) Top upside down on a padded surface, such as a carpet. Position (C3) Lift Column as shown noting correct hole pattern. Attach (C3) Lift Column to the bottom of (C1) Top using (H1) Pan Head Screws and (T1) Hex Driver. PART/DESCRIPTION QTY T1-HEX DRIVER 1 H1-SCREW 4 Hole Pattern C3 H1 C3 H1 C1 C1 4 | BDIUSA.
STEP 2. ATTACH BASE ASSEMBLY Attach (C2) Base using (H2) Flat Head Screws going into the countersunk holes and into the bottom of (C3) Lift Column. Tighten with (T1) Hex Driver. PART/DESCRIPTION QTY T1-HEX DRIVER 1 H2-SCREW 4 H2 H2 C2 C2 C3 C1 NEED ASSISTANCE? customerservice@bdiusa.com BDIUSA.
OPERATION Serif is a uniquely adjustable table that takes your work surface to new heights. Adjusting easily on its pneumatic cylinder with the simple downward push or an upward pull, this table is equally at home towering over the arm of a sofa as it is nestled neatly in your lap. Whether used for a laptop or simply snacking by the TV, Serif’s slim base glides neatly under a sofa or chair, putting the table surface close at hand. Weight limit: 25 lb DO NOT sit or stand on table.
CARE & MAINTENANCE GLASS Glass surface is maintained using household glass cleaner and a paper towel or cloth. SATIN-ETCHED GLASS This uniquely smooth-to-the-touch glass surface can be regularly maintained using household glass cleaner and a paper towel or cloth. Minor scratches or scuffs not eliminated using paper towel or cloth can usually be removed by using a ‘Magic Eraser’. Magic Eraser is a melamine foam product available at any grocery store or home improvement center.
WARRANTY BDI warrants to the original purchaser that for the below stated warranty term, BDI will repair or replace any product, part, or component covered by this warranty which fails under normal use as a result of a defect in material or workmanship. BDI will repair or replace the aforementioned product, part or component with a comparable product, part or component. The decision to repair or replace will be at BDI’s sole discretion.
