Assembly Instructions

ManualsBrandsBDI ManualsComputers & TabletsBDI Stance 6650 Black Small Standing Desk

These distinctive product conﬁgurations are protected by US and international patents, trade dress, and/or

Made in Turkey & China. 12.03.2019 V4

C8 Wire Tray Panel x 1

C9 Wire Tray Shelf x 1

C6 Power Cord x 1

C1 Control Module x 1

C2 Keypad x 1

A1 Main Panel x 1

C7 Cord Conduit x 1

C5 Foot x 2

bdiusa.com

customerservice@bdiusa.com

STANCE

6650/6651/6652

LIFT DESK

Tool Required:

Phillips Screwdriver

H3 M6 x 12mm Screw x 10

Product Registration

Registering your new BDI product allows us to send you important

product updates, service information and helpful hints related to your BDI

products. Register today, and you will be entered to win free a BINK table

from BDI: www.bdiusa.com/register

Placement and Maintenance

Stance

Lift Desk is designed for indoor use on level floors. Clean glass

with glass cleaner, and steel parts and wood veneer with a damp cloth.

Your Stance

Lift Desk is engineered for easy assembly. Carefully

follow this procedure to prevent any damage. Do not use power tools

for assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly workspace

should be a non-marring surface such as carpet. For missing hardware

pieces, please contact BDI Customer Service at customerservice@bdiusa.

com. For all other concerns, please contact your BDI retailer.

H8 Cord Wrap x 2

H6 Wire Clip x 6

H1 Wood Screw x 12

H2 Long Wood Screw x 2

T1 4mm Hex Wrench

H4 M6 x 16mm Flathead

Screw x 8

C3 Leg x 2

OWNER’S MANUAL

Summary of content (15 pages)

PAGE 1
STANCE® 6650/6651/6652 LIFT DESK bdiusa.com customerservice@bdiusa.com OWNER’S MANUAL Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today, and you will be entered to win free a BINK table from BDI: www.bdiusa.com/register T1 4mm Hex Wrench Placement and Maintenance Stance® Lift Desk is designed for indoor use on level floors.
PAGE 2
Step 2 - Lay main panel upside down on a soft surface (like carpet). Position 2 legs C3 into the corners inside the metal frame with cords facing inward. Attach the 2 legs to the metal frame using screws H3 and tighten with hex wrench T1. Start all screws before tightening the screws. H2 x 8 C3 H3 T1 C3 H3 H3 H3 Step 3 - Attach 2 cord wraps H8 using wood screws H1 going into the 2 sets of pilot holes located as shown. Tighten with a Phillips screwdriver.
PAGE 3
Step 4 - Attach Keypad C2 on the desired side (left or right) with 2 wood screws H1 going into pre-drilled pilot holes. Tighten with a Phillips screwdriver. Step 5 - Position the control module C1 so that the keypad socket (labeled HS) is facing the keypad and secure between the 2 steel rails with 2 long wood screws H2 as shown going into the pre-drilled pilot holes. Tighten with a Phillips screwdriver. Step 6 - Route the keypad cord into the groove in the panel and through the hole in the metal frame.
PAGE 4
Step 7 - Secure the keypad cord into the groove using cord clips H6 and wood screws H1. Step 8 - Connect the leg cords into the control module sockets labeled M1 and M2. Use the hook and loop ties provided to gather loose cords. leg cord H1 x 6 H6 x 6 cord inside groove control module Hook & Loop Tie 4 STANCE 6650/6651/6652 LIFT DESK bdiusa.com customerservice@bdiusa.
PAGE 5
Step 9 - Making sure the long end of the foot is facing towards the front of the desk, attach each foot C5 with flathead screws H4 and hex wrench T1. Step 10 - Separate wire tray panel C8 from wire tray shelf C9. Note: they will only separate when rotated to a closed position as shown. Attach wire tray panel C8 to the middle of the back edge of the desk using screws H3 going into 2 threaded inserts. Tighten with Hex Wrench T1.
PAGE 6
Step 11 -Drawer (optional accessory) If you did not purchase a drawer or modesty panel, proceed to step 13. Using the 4 screws and hex wrench that came with your drawer, install the drawer as shown with front of drawer facing the front edge of the desk. Start threading all 4 screws before tightening.
PAGE 7
Step 13 - Plug the Power Cord C5 into the power port (labeled AC) on the Control Module C3. Step 14 - With the help of another person, carefully turn the desk on to its feet. Plug the other end of the Power Cord into the nearest wall socket. Refer to the User Manual on Page 12 and follow the Reset Procedure. You may now adjust the height of your desk. 2 Person Task 7 STANCE 6650/6651/6652 LIFT DESK bdiusa.com customerservice@bdiusa.
PAGE 8
Step 15 - Reattach wire tray shelf C9 to wire tray panel C8 and open so the shelf is flat. Use the shelf to hold power strips or power modules and gather the excess cords using cord wraps H8. Step 16 - Modesty Panel [continued (optional)] Find the 2 threaded holes on either side of the metal tray. Thread screws (provided with the modesty panel) half way into the threaded holes.
PAGE 9
Attach the Cord Conduit (optional) Remove adhesive film and attach the Cord Conduit C6 to the back of the top section of the leg nearest the wall outlet. Insert power cord(s) into the Cord Conduit. C6 Remove excess lubricant from legs When new, the legs may have excess lubricant. Extend the legs to their highest position and wipe off excess lubricant with a clean, dry cloth or rag. 9 STANCE 6650/6651/6652 LIFT DESK bdiusa.com customerservice@bdiusa.
PAGE 10
Install the Drawer liner (optional) Open the drawer. Place the drawer liner into the drawer. Use the notches on the back of the drawer to route cords. The front of the drawer can swing down to accommodate keyboard use. Drawer liner Cord management notch Flip down front Adjust levelers Levelers are integrated into each leg assembly and are accessed at the bottom of each leg. If your floor is uneven, you may extend one or more levelers to attain a level, stable position.
PAGE 11
Attach a monitor arm (optional) The Stance Lift Desk is compatible with most third party monitor arms. Attach your monitor arm on either side of the metal wire tray, or on either side of the modesty panel as indicated by the arrows below. For Model #6650, a monitor arm will not fit if the modesty panel is installed. Caution! Do not push a metal bracket directly onto the edge of the glass. Leave a few mm (1/16”) between the monitor arm and the edge of the glass to prevent the glass from breaking.
PAGE 12
User Manual Caution! • Make sure there are no obstacles under or over the path of the desk. • Make sure the desk top is not touching any walls. • Make sure all the cords are long enough to reach lowest and highest desk positions. ! ! Important: • You must reset the desk prior to use. Reset Procedure: 1. 2. 3. 4. 5. 6. Press and hold the DOWN button on the keypad until the desk reaches its lowest height. Release the DOWN button. Press and hold the DOWN button again until the LED sidplay reads “RST”.
PAGE 13
Height Adjustment The desk base can be adjusted by pressing and holding either the UP or DOWN button until the desired height is reached. To program up to four presets, use the up/down buttons to find a desired height, then press “BDI” followed by a number 1-4. To Change the Movement Program (explained below) follow the Reset Procedure to step 4. The display should be flashing “RST”. Press and hold the “1” button (about 5 seconds) until the display flashes “10.1” or “10.2”.
PAGE 14
Setting the Upper and Lower Limits The base is designed to go to its minimum and maximum heights, allowing for the widest possible range. If you prefer to change the settings to a more narrow range, follow these steps: To set the Lower-limit position: Use the UP/DOWN buttons to move the base to the desired minimum height position. Press and release the “BDI” button and the LED display should read “S”. Next, press and release the DOWN button.
PAGE 15
Trouble Shooting If your desk is not functioning properly it may need to be reset. Follow the RESET procedure above. If your LED readout displays an error message Er1 confirm that all wired connections are secure. Then perform the reset procedure above. 15 STANCE 6650/6651/6652 LIFT DESK bdiusa.com customerservice@bdiusa.