Assembly Instructions

These distinctive product conﬁgurations are protected by US and international patents, trade dress, and/or

Made in Turkey. 06.20.2019

Modesty Panel x 1

Brackets x 2

bdiusa.com

customerservice@bdiusa.com

STANCE

6657

MODESTY PANEL

Tool Required:

Phillips screwdriver

Hardware List:

Product Registration

Registering your new BDI product allows us to send you important product

updates, service information and helpful hints related to your BDI products.

www.bdiusa.com/register

Placement and Maintenance

Stance® Lift Desk is designed for indoor use on level floors. Clean wood

veneer with a damp cloth.

Your Stance® Office furniture is engineered for easy assembly. Carefully

follow this procedure to prevent any damage. Do not use power tools

for assembly of this product.

Step 1

Unpack and identify the parts listed below. The assembly workspace should

be a non-marring surface such as carpet. For missing hardware pieces,

please contact BDI Customer Service at customerservice@bdiusa.com.

For all other concerns, please contact your BDI retailer.

H1 Wood Screw x 8

H2 M6 x 12 Screw x 2

PAGE 1
STANCE® 6657 MODESTY PANEL bdiusa.com customerservice@bdiusa.com Product Registration Registering your new BDI product allows us to send you important product updates, service information and helpful hints related to your BDI products. Register today, and you will be entered to win free a BINK table from BDI: www.bdiusa.com/register Placement and Maintenance Stance® Lift Desk is designed for indoor use on level floors. Clean wood veneer with a damp cloth.
PAGE 2
Step 1 - Install the brackets Attach the 2 metal brackets to the modesty panel as shown with the 8 wood screws provided going into the 8 pilot holes located towards the top, inside edge of the panel. Tighten with a Phillips screwdriver. DO NOT use a power drill. DO NOT over tighten the screws, otherwise they will strip. Phillips screwdriver H1 Wood Screw x 8 2 STANCE 6657 MODESTY PANEL bdiusa.com customerservice@bdiusa.
PAGE 3
Step 2 - Install the modesty panel Find the 2 threaded holes on either side of the metal tray. Thread the screws H2 half way into the threaded holes. Hook the modesty panel onto the screw heads, slide backward and then tighten the 2 screws with the hex wrench provided. Metal Tray H2 1) Insert screws half way 2) Slide bracket notch backwards and onto screw heads 3) Tighten screws with hex wrench provided Bracket notch 3 STANCE 6657 MODESTY PANEL bdiusa.com customerservice@bdiusa.