Assembly Instructions

bdiusa.com
[e-mail]
TANAMI 7120
BAR
2
Step 3 - Base Attachment
With help from another person, carefully position cabinet C1 on its back (on top of a few layers of packing
material). Attach the base to the bottom of cabinet C1 as shown using 8 screws H2 going through the
metal tabs and 2 screws H3 going through the cross bar. With all screws started, tighten all screws
with hex wrench T1. See Detail on next page.
Step 2 - Base Assembly
Find the 2 legs inside Cabinet C1. Position 2 legs C2 towards the ends of cross bar C3 as shown mak-
ing sure the countersunk holes on the legs are facing outward. Use 4 flathead screws H1 and hex
wrench T1 to assemble the base. Do not fully tighten the screws yet.
2 Person Ta sk
C2
C2
T1
C1
H1
H1 x 4
H1
H2
H2
C3
H2
H2
H2
H2
H2
H2
H3
H3
T1