9" BLU-RAY DISC PLAYER BDP-620 BLU-RAY DISC PLAYER BDP-620 USER MANUAL
Table of Contents English Table of Contents............................................ 2 Warning............................................................ 3 Safety................................................................ 3 Notes About the Discs.................................... 4 Precautions...................................................... 4 Important Safety ............................................ 5 Instructions ..................................................... 5 FCC Statement...
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. • Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire. CAUTION The use of optical instruments with this product will increase eye hazard. As the laser beam used in this Blu-ray Disc player is harmful to eyes, do not attempt to disassemble the cabinet.
Notes About the Discs • To keep the disc clean, handle the disc by its edge. Do not touch the surface. Dust, fingerprints, or scratches on the disc may cause it to malfunction. English On operation • If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly.
1. Read these instructions and keep it for future reference. 2. Heed all warnings. 3. Follow all instructions. 4. Do not use this apparatus near water. 5. Clean only with dry cloth. 6. Do not block any ventilation openings. Install in accordance with the manufacture’s instructions. 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8.
Basic Information About this manual Instructions in this manual describe the controls on the remote. You can also use the controls on the player if they have the same or similar names as those on the remote. The meanings of the icons used in this manual are described as below: English Icon BD DVD DATA DVD CD Meaning Functions available for BD-ROMs and BD-REs/BD-Rs*1, including DL discs. Functions available for DVD VIDEOs and DVD+RWs/DVD+Rs in +VR mode or DVD-RWs/DVD-Rs in video mode,including 8 cm discs.
BD/DVD region code Your player has a region code printed on the back of the unit and only will play BD-ROM/DVD VIDEOs (playback only) labeled with identical region codes. This system is used to protect copyrights. Note on playback operations of BDs/ DVDs Some playback operations of BDs/DVDs may be intentionally set by software producers. Since this player plays BDs/DVDs according to the disc contents the software producers designed, some playback features may not be available.
Product Overview Front Panel 1 2 3 4 5 6 English BLU-RAY DISC PLAYER BDP-620 1 2 3 4 - IR Receiver Receive signals from the remote control. Front Panel Display Disc Tray (Open/Close) Open/Close the disc tray. 5 6 7 Play&Pause Start or Pause playback. (Standby) Turns on the player, or sets to standby mode. USB Port Note: The buttons of 4 , 5 , 6 will show after power on. Front Panel Display The playback information is displayed as follows. Example: When playing a DVD VIDEO or a BD-ROM.
Control Via RS232 (optional) If you have chosen for the RS232 option, third party equipment can be programmed to send ASC11 coded commands to the BDP-620, similar to the functions on the remote control. (settings at 9600 bps. N,8,1). English Protocol: First byte: I Second Byte : C • When powered on, the unit will send the following string: Interstate Audio Rs232 link V1.1 • When the code is recieved correctly it will be excecuted and “ack” will be send back.
Guide to the Remote Control The following covers all of the remote’s functions. Refer to the list when necessary. (OPEN/CLOSE): Open/close the disc tray. (POWER): Turn on, or set the player to standby mode. 2 MUTE - Press to silence and press it again to resume. 3 REPEAT Once playback begins, Press REPEAT key on the remote control to cycle through the various repeat modes: - Press repeat until (REPEAT FILE) appears to ‘loop’ the current file.
Guide to the Remote Control Continue 21 20 19 18 17 16 15 8 14 9 13 10 12 11 8 SLOW - Play in slow motion or stop motion. To return to normal play, press ENTER. 9 PLAY/PAUSE - Press to start or pause playback. 10 / (scan)* - Scan backward or forward. The speed changes when pressed repeatedly. * Depending on the disc or file type, the function may not work or the scan speeds may differ. 11 Color buttons (RED/GREEN/YELLOW/BLUE) - Short cut keys for selecting items on some BD’s menus.
Main features • • • English • • • Support 2D discs playback, BonusView functions and BD-Live features. HDMI 1080p output with a frame rate of 24 frames per seconds (need your TV support). Supported file formats: MP4, MP3, TS/TP, AVI, M2TS, VOB, FLV, MPG,JPG Support codec formats: H.264, VC-1, MPEG-1/2/4, XviD, DTSMA, DTSHR, DTS Digital Surround, Dolby TrueHD,Dolby Digital Plus, Dolby Digital, MP3, LPCM, JPEG Support playgback of most of network videos, we have the final interpretaion about this.
• Be sure to disconnect the HDMI cord when moving the player. Rear panel of Blu-ray disc player To HDMI OUT TV, Projector, or Amplifier(Receiver) HDMI cord(Not supplied) This Blu-ray Disc player incorporates HighDefinition Multimedia Interface (HDMI™) technology. HDMI, the HDMI logo and HighDefinition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.
Step 4: Connecting the Audio Step 5: Connecting to Network Cords • Connect your blu-ray player to the network A Connecting to a stereo amplifier (receiver) with a optical input jack (only for the products with a optical input jack) English Connect one end of a coaxial cable (not supplied) to the OPTICAL jack on your blu-ray player, and connect the other end to the OPTICAL input jack on the amplifier (receiver).* to enjoy software updates and BD-live bonus content.
Step 8: Easy Setup Wizard 1. You can control the player using the supplied remote. Insert two R03 (size AAA) batteries by matching the+ and - ends on the batteries to the markings inside the battery compartment. When using the remote, point it at the remote sensor on the player. When turning on the Blu-ray player for the first time, Easy Setup Wizard is displayed on screen. Follow the wizard to configure the basic settings of your Blu-ray player.
Home Menu Operation Using the Home Menu Press HOME button to display the Home Menu. English Home Menu Screen General Setting: System, Language, Playback, Security, Network. Display Setting: TV, Video Process, Motion Video Process. Audio Setting: Audio Output, Speaker Setting System Information: Software Version, MAC address. Use direction buttons to select and press Enter to confirm, press HOME again to exit. Note: Some settings are only available in stop mode.
Closed Caption Turn on/off the closed caption function. Angle Mark Turn on/off Angle Mark. Some BD/DVD-Video discs contain scenes recorded at different camera angles and allow the user to view video play from different camera angles. When this option is set to ON, the Bluray disc player will identify if the disc is recorded with multi angle automatically and notify you by displaying this icon. PIP Mark Turn on/off PIP (picture in picture) Mark.
BD-Live Connection English This player is capable of accessing content from the internet. Using this option to control which websites the BD player is allowed to access additional content. Available settings are: Permitted: Allow the inserted Blu-ray disc to access content from all BD-LiveTM Internet sites whose Internet address is encoded onto the disc.
Speaker Setting Configuration Use this option to select output configuration. Title: Displays current title number/total number of titles. Chapter: Displays current chapter number/total number of chapters. Time: Displays the current playback time and total time. Press Up/Down direction button to view the remaining time. Test Tone Use this option to test the speaker connections. Post Process EQ Sets the EQ Mode: Select the playback mode.
Checking the Disc Information Playing image files Press Angle button while playing image files to display the OSD menu, as shown below: BD DVD DATA DVD CD Press INFO button to check the title/chapter etc. information. The information differs depending on the disc type and the player status. English Example: when playing a BD-ROM. File: Displays current file number/total number of files. Playback Mode: Selects the image playback mode. Slideshow: Selects the slideshow speed.
Introduction Media center allows you to browse and play media files such as videos, photos and music files stored on a data disc or a USB flash drive. Supported Functions Your player supports the following functions: Video playback: >> Pause, Resume, Stop, Fast forward, Fast reverse, Repeat. >> Skip to next video, skip to previous video. Audio playback: >> Pause, Resume, Stop, Fast forward, Fast reverse, >> Repeat. >> Skip to next song, skip to previous song.
Troubleshooting No sound is output from the HDMI OUT jack • Try the following: 1 Turn the player off and on again. 2 Turn the connected equipment off and on again. 3 Disconnect and then reconnect the HDMI cord. • The HDMI OUT jack is connected to a DVI device (DVI jacks do not accept audio signals). If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs.
Model BDP-620 System Laser: Semiconductor laser Outputs Jack name AUDIO OUT L/R DIGITAL OUT (OPTICAL) VIDEO Jack type Output level Phono jack Phono jack Phono jack 2 +0.1 Vrms 0.5 Vp-p 1.0+0.2 Vp-p HDMI OUT General Power requirements HDMI 19-pin standard connector Power consumption Operating temperature 100-240 V AC, 50/60 Hz 20 W 5 oC to 35 oC Dimensions (approx.) Weight (approx.) 483 x 44 x 210 mm (incl. brackets) 1.95 kg 430 x 38 x 210 mm (excl.
