Platinum USER MANUAL 1200W 1000W 850W 750W 650W 550W
INDEX Glinde, February 2019 ENGLISH » Introduction ����������������������������������������������������������������������������������������������������������������������������������������������������������5 Safety instructions ����������������������������������������������������������������������������������������������������������������������������������������������5 Compatibility ����������������������������������������������������������������������������������������������������������������������������
Funkcje bezpieczeństwa ������������������������������������������������������������������������������������������������������������������������������������20 Usuwanie usterek ����������������������������������������������������������������������������������������������������������������������������������������������� 21 Częste problemy �������������������������������������������������������������������������������������������������������������������������������������������������21 Akcesoria ����������������
1. INTRODUCTION We are delighted that you have chosen to use a be quiet! power supply from our Straight Power 11 Platinum series in your PC. Please read and follow all the information contained in these instructions carefully prior to installation. Should you have any further question, please contact our customer service. See contact information in item Manufacturer’s details. 2. SAFETY INSTRUCTIONS The power supply is only guaranteed to function properly if the instructions are followed.
Caution: Only use the supplied cable set. Using cables that were not included (e.g. cables of older power supply unit series) may lead to defects! First remove your old power supply. To do so, proceed as follows: ∙∙ Carefully disconnect your PC from any power sources and unplug all cables connected to the PC. ∙∙ Open the PC case, taking care to follow the manufacturer’s instructions. ∙∙ Disconnect all plugs from the motherboard and all other components, such as FDDs, HDDs, or optical drives.
Never open the power supply case. High-voltage components in the interior of the power supply may still be live after a longer period of disuse. Please have any and all necessary repairs conducted by an authorized expert! Opening the device will void your warranty. If the system in which you installed the power supply does not work properly, check for these possible sources of error first: ∙∙ Check that the mains cable to the power supply is correctly and firmly plugged into the power supply and the socket.
10. WARRANTY ∙∙ 5-year manufacturer’s warranty for consumers (original purchase from authorised be quiet! dealers only). ∙∙ Your original purchase receipt will be required before warranty performance is rendered. Please keep it in a safe place. ∙∙ Opening the device, manipulations and / or technical modifications of any kind and damage due to external mechanical force will void your warranty. ∙∙ To read the warranty terms and conditions in full, see Service/Warranty Conditions on the homepage at bequiet.
1. EINLEITUNG Wir freuen uns, dass Sie sich dazu entschieden haben, ein be quiet! Netzteil der Straight Power 11 Platinum Serie in Ihrem Rechner einzusetzen. Vor der ersten Inbetriebnahme befolgen Sie bitte alle Punkte dieser Anleitung. Falls Sie weitere Fragen haben, richten Sie diese gerne an unseren Kundenservice. Siehe hierzu Kontaktdaten unter „Herstellerangaben“. 2. SICHERHEITSHINWEISE Vor der ersten Inbetriebnahme befolgen Sie bitte alle Punkte dieser Anleitung.
4. INSTALLATION IHRES NEUEN NETZTEILS Lesen Sie bitte den Punkt „Sicherheitshinweise“ bevor Sie mit der Installation beginnen. Anmerkung: Zum Einbau des Netzteils in Ihren PC benötigen Sie einen Schraubendreher. Benutzen Sie nur die mitgelieferten Schrauben aus dem Lieferumfang, da diese über das richtige Gewinde verfügen. Achtung: Verwenden Sie nur den mitgelieferten Kabelsatz! Das Verwenden von nicht mitgelieferten Kabeln (z.B.
OPP (Überlastschutz) Diese Sicherung löst aus, sobald die gesamte Leistung, welche vom Netzteil abgenommen wird, die spezifizierte Höchstlast übersteigt. Dieser Fall kann eintreten, wenn das Netzteil nicht über genügend Leistung für das System verfügt (unterdimensioniert ist). 6. FEHLERBEHEBUNG Bitte beachten Sie: Bei ATX-Systemen wird das Netzteil vom Mainboard aktiviert, um den PC zur starten.
9. ENTSORGUNGSHINWEISE Gebrauchte Elektro- und Elektronikgeräte dürfen gemäß europäischer Vorgaben* nicht mehr zum unsortierten Siedlungsabfall gegeben werden. Sie müssen getrennt erfasst werden. Das Symbol der Abfalltonne auf Rädern mit Balken weist auf die Notwendigkeit der getrennten Sammlung hin. Helfen auch Sie mit beim Umweltschutz und sorgen Sie dafür dieses Gerät in die hierfür vorgesehenen Systeme der Getrenntsammlung zu geben, wenn Sie es nicht mehr weiter nutzen wollen.
12. COPYRIGHT ∙∙ Der Inhalt dieser Dokumentation darf ohne vorherige schriftliche Genehmigung durch Listan in keiner Form, weder ganz noch teilweise, vervielfältigt, weitergegeben, verbreitet oder gespeichert werden. ∙∙ be quiet! ist eine eingetragene Marke der Firma Listan GmbH. Andere in dieser Dokumentation erwähnten Produkte- und Firmennamen können Marken oder Handelsnamen ihrer jeweiligen Eigentümer sein. ∙∙ Listan entwickelt entsprechend ihrer Politik die Produkte ständig weiter.
1. INTRODUCTION Nous vous remercions d'avoir choisi un bloc Straight Power 11 Platinum de be quiet!. Avant la première mise en service, nous vous recommandons de lire attentivement ce manuel et d’en observer les consignes. Si vous avez d’autres questions, nous vous invitons à prendre contact avec notre service après-vente, dont vous trouverez les coordonnées dans la rubrique « Informations constructeur ». 2.
Remarque : vous aurez besoin d’un tournevis pour effectuer l’installation de votre bloc d’alimentation. Utilisez exclusivement les vis livrées avec votre bloc car elles présentent le filetage requis. Attention : veuillez utiliser uniquement les câbles fournis avec votre alimentation. Utiliser d’autres câbles peut s’avérer dangereux et peut entraîner des défaillances.
6. DÉPANNAGE Remarque : veuillez noter qu’avec un système ATX, l’alimentation est activée par la carte mère pour démarrer votre PC. Il convient donc de suivre le manuel d’utilisation de la carte mère et/ou du boîtier pour vérifier si l‘interrupteur marche/arrêt est correctement câblé. Attention : manipuler des éléments sous tension comporte un risque de blessures graves voire mortelles.
9. CONSIGNES D’ÉLIMINATION ET DE RECYCLAGE En application des directives européennes*, les appareils électriques et électroniques usagés ne peuvent plus être jetés avec les déchets ménagers. Ils doivent être triés, comme l’indique le symbole du conteneur à déchets barré d’une croix. Contribuez vous aussi à la protection de l’environnement. Lorsque votre appareil n’est plus utilisable, conformez-vous aux règles en vigueur dans votre localité et ne jetez pas votre appareil avec les déchets ménagers.
12. DROITS D’AUTEUR ∙∙ Le contenu de la présente documentation ne peut être reproduit, distribué, diffusé ou enregistré d’aucune manière que ce soit, ni en tout ni en partie, sans l’autorisation préalable écrite de Listan GmbH. ∙∙ be quiet! est une marque déposée de la société Listan GmbH. Les autres noms de produits et de sociétés mentionnés dans la présente documentation peuvent être des marques ou des noms commerciaux appartenant à leurs propriétaires respectifs.
1. WPROWADZENIE Cieszymy się, że zdecydowali się Państwo na zamontowanie w swoim komputerze zasilacza be quiet! serii Straight Power 11 Platinum. Aby od razu odpowiedzieć na Państwa ewentualne pierwsze pytania, opisaliśmy zalety i cechy szczególne serii zasilaczy Straight Power 11 Platinum w niniejszej instrukcji obsługi. Dalsze pytania prosimy kierować do pracowników Działu Obsługi Klienta – patrz dane kontaktowe, punkt Dane producenta. 2.
4. INSTALACJA NOWEGO ZASILACZA Przed rozpoczęciem instalacji należy przeczytać punkt „Wskazówki bezpieczeństwa”. Uwaga: Do zamontowania zasilacza w komputerze potrzebny będzie śrubokręt. Należy użyć śrub dostarczonych wraz z zasilaczem, gdyż posiadają one odpowiednie gwinty. Uwaga: Należy używać wyłącznie dostarczonego zestawu kabli. Używanie kabli innych niż dostarczone (np. kabli starszych serii zasilaczy) może doprowadzić do usterki! Najpierw należy wymontować stary zasilacz.
OPP (Zabezpieczenie przeciążeniowe) To zabezpieczenie uaktywnia się, gdy tylko całkowita moc pobierana od zasilacza jest wyższa, niż podane w specyfikacji obciążenie maksymalne. Taki przypadek może mieć miejsce, gdy zasilacz nie dysponuje mocą wystarczającą dla systemu (jest niedowymiarowany). 6. USUWANIE USTEREK Uwaga: W celu uruchomienia komputera w przypadku systemów ATX zasilacz jest włączany przez płytę główną.
9. WSKAZÓWKI DOTYCZĄCE RECYCLINGU Zgodnie z europejskimi przepisami* niedozwolone jest wyrzucanie używanych urządzeń elektrycznych oraz elektronicznych do zwykłych pojemników na śmieci. Muszą one zostać zebrane oddzielnie. Symbol kubła na śmieci na kółkach wskazuje na konieczność oddzielnego zbierania tych odpadów. Proszę wesprzeć ochronę środowiska i zadbać o to, aby urządzenie, którego nie chcą Państwo już używać, trafiło na specjalne wysypisko odpowiednie dla takich odpadów.
12. PRAWA AUTORSKIE ∙∙ Zabronione jest powielanie, przekazywanie, rozpowszechnianie lub zapis treści tej dokumentacji w dowolnej formie w całości lub częściowo bez uprzedniego pisemnego zezwolenia frmy Listan. ∙∙ be quiet! jest zarejestrowaną marką frmy Listan GmbH. Inne wymienione w niniejszej dokumentacji produkty oraz nazwy firm mogą stanowić marki lub nazwy handlowe konkretnych właścicieli. ∙∙ Listan stale rozwija produkty zgodnie z polityką firmy.
1. INTRODUCCIÓN Gracias por haber escogido un bloque de alimentación be quiet! de la serie Straight Power 11 Platinum para su ordenador. Antes de usar el dispositivo por primera vez, siga todos los puntos de este manual. Si tiene más dudas, consulte a nuestro servicio de atención al cliente. Para ello, vea los datos de contacto del punto Datos del fabricante. 2.
Atención: Use sólo el conjunto de cables suministrado! El uso de otro tipo de cables (como por ejemplo, el de una fuente de alimentación más antigüa) puede dañar la unidad! Primero, desmonte el antiguo bloque de alimentación. Para ello, proceda del siguiente modo: ∙∙ Desconecte el PC de toda alimentación eléctrica y desenchufe con cuidado todos los cables conectados al PC. ∙∙ Abra la caja del PC siguiendo las instrucciones del manual del fabricante.
6. SOLUCIÓN DE ERRORES A tener en cuenta: En los sistemas ATX, la placa base activa el bloque de alimentación para iniciar el PC. Por lo tanto, compruebe si el interruptor de encendido/apagado está bien conectado con ayuda del manual de la placa base o la caja. Atención: Manipular fuentes de energía puede provocar lesiones mortales. Si hay indicios de humo, cables dañados o líquidos, desenchufe inmediatamente el bloque de alimentación y no vuelva a ponerlo en funcionamiento.
En Alemania, está obligado** por ley a desechar un dispositivo usado por separado de la basura convencional sin clasificar. Las empresas públicas encargadas de recoger la basura (municipios) han creado puntos de recogida donde se pueden reciclar los dispositivos domésticos usados de forma gratuita. También es posible que estas empresas de recogida de basura vayan a buscar los dispositivos usados a los domicilios particulares.
1. ВВЕДЕНИЕ Мы рады, что вы выбрали блок питания Straight Power 11 Platinum серии производства be quiet! для вашего ПК. Пожалуйста, прочтите и следуйте информации, представленной в данной инструкции. Если у вас возникнут дополнительные вопросы, пожалуйста, свяжитесь со службой поддержки пользователя. Контактную информацию вы найдете в разделе «Подробности о производителе». 2.
Сначала демонтируйте старый блок питания. Чтобы сделать это, выполните следующие действия: ∙∙ Осторожно отсоедините компьютер от любых источников питания и отключите все кабели, подключенные к компьютеру. ∙∙ Откройте корпус ПК, внимательно следуя инструкции производителя. ∙∙ Отсоедините все разъемы от системной платы и других компонентов, таких как FDD, жесткие диски или оптические приводы. Убедитесь, что все кабели от старого блока питания отсоединены от компонентов системы.
∙∙ Убедитесь, что сетевой кабель электропитания правильно и надежно подключен к порту питания и розетке. Оптимально использовать отдельную розетку для питания компьютера. ∙∙ Убедитесь, что все разъемы правильно подключены и внесите коррективы, например, в случае неправильной полярности. ∙∙ Проверьте соединение выключателя корпуса с системной платой.
11. ПОДРОБНОСТИ О ПРОИЗВОДИТЕЛЕ Listan GmbH | Biedenkamp 3a | 21509 Glinde Deutschland Для получения поддержки в Германии вы можете позвонить на нашу бесплатную горячую линию: Пн – Пт, 09:00 – 17:30. Тел. 0049 40 736 7686 - 44 Факс 0049 40-7367686-69 Email: info@be-quiet.ru Интернет-страница и калькулятор мощности БП: www.bequiet.com 12.
AC Input DC Output 100 - 240Vac 50 - 60Hz 6 - 3A 12V1 12V2 12V3 12V4 -12V 5VSB 18A 18A 19A 19A Max. Current 24A 24A 0.3A 3A TECHNICAL DATA 37.5A 450W Technische Daten, Données technique, Datos técnico, Dane technicze, 450WТехнические характеристики 3.6W 15W 120W Max. Combined Power 450W 1. 5V 3.3V 5V 22A 22A LABEL AC Input DC Output 550W Max. Current Max. Combined Power AC Input DC Output 650W Max. Current Max. Combined Power AC Input DC Output 750W Max. Current Max.
2. VOLTAGE REGULATION DC Output 3.3V 5V 12V1 12V2 12V3 12V4 -12V 5VSB Tolerance +/- 3% +/- 3% +/- 3% +/- 3% +/- 3% +/- 3% +/- 4% +/- 3% Ripple/Noise (max.) 40mV 40mV 80mV 80mV 80mV 80mV 80mV 40mV 3. 4. OPERATING CONDITIONS Environment Temperature Rel. Humidity Operation 0 ~ 40°C up to 85% (non-condensing) Storage -40 ~ 70°C up to 98% (non-condensing) MINIMAL LOAD 1200W 5. 3.
Please make sure you balance the load across the 12 volt rails 12V3 und 12V4: ■ When using two PCIe cables, connect PCIe 1 and PCIe 3 ■ When you only need one PCIe cable, connect PCIe 2 i 12V4 12V4 12V3 12V4 12V3 12V3 Bitte achten Sie auf eine gleichmäßige Auslastung der 12V-Leitungen 12V3 und 12V4: ■ Verwenden Sie PCIe 1 und PCIe 3, wenn Sie zwei PCIe-Kabel verwenden ■ Verwenden Sie PCIe 2, wenn Sie nur ein PCIe-Kabel verwenden Assurez-vous d’équilibrer la charge sur les rails 12 volts 12V3 et 12V4
7.
850W 550mm 150mm 150mm 150mm 150mm 4-pin 600mm 24-pin 20-pin 12V P4-connector 700mm 12V P8-connector 12V P4-connector 12V P8-connector 600mm PCIe (6+2-pin) PCIe (6+2-pin) PCIe (6+2-pin) HDD PCIe (6+2-pin) 550mm S-ATA S-ATA 36 S-ATA S-ATA S-ATA S-ATA S-ATA S-ATA FDD HDD HDD S-ATA S-ATA HDD HDD S-ATA
750W 550mm 150mm 150mm 150mm 150mm 4-pin 600mm 24-pin 20-pin 12V P4-connector 700mm 12V P8-connector 12V P4-connector 12V P4-connector 12V P8-connector 12V P4-connector 12V P8-connector 600mm PCIe (6+2-pin) PCIe (6+2-pin) PCIe (6+2-pin) HDD PCIe (6+2-pin) 550mm S-ATA S-ATA S-ATA S-ATA S-ATA S-ATA S-ATA S-ATA FDD HDD HDD S-ATA HDD HDD S-ATA S-ATA 37
650W 550mm 150mm 150mm 150mm 150mm 4-pin 600mm 24-pin 20-pin 12V P4-connector 700mm 12V P8-connector 12V P4-connector 12V P4-connector 12V P8-connector 12V P4-connector 12V P8-connector 600mm PCIe (6+2-pin) PCIe (6+2-pin) 600mm PCIe (6+2-pin) HDD FDD PCIe (6+2-pin) 550mm S-ATA S-ATA S-ATA S-ATA HDD HDD S-ATA HDD S-ATA 38 S-ATA S-ATA S-ATA
550W 550mm 150mm 150mm 150mm 150mm 4-pin 600mm 24-pin 20-pin 12V P4-connector 700mm 12V P4-connector 600mm PCIe (6+2-pin) 12V P8-connector HDD FDD PCIe (6+2-pin) 550mm S-ATA S-ATA S-ATA S-ATA HDD HDD S-ATA HDD S-ATA S-ATA S-ATA S-ATA 39