Surface Cleaner Manual

WWW.BEPRESSURE.COM
T
hank you for purchasing a BE Whirl-A-Way. We know that you
had a choice in the purchase of a at surface cleaner, and we
would like to congratulate you on purchasing our very affordable
and durable cleaner.
16" - 24" SET-UP PROCEDURES
We recommend
that you first fit
the lower por-
tion of the handle
into the mounting
brackets on the
cover and secure
with the bolts or
the pins & clips.
1 2
Next, tighten
the “xed” hose
end into the gun
mounted onto
the upper portion
of the handle.
Use teon tape
on the hose ends
and tighten until
snug. Do not
overtighten.
Once this is com-
plete, join the two
sections of the
handle together
and secure with
the bolt or the
pin & clip.
3 4
Next, tighten the
swivel end of the
hose into the top
of the rotary head
until snug.
Turn the cover
over and check to
ensure that the
nozzle tips are
securely tightened
and the spray pat-
tern is in line with
the rotary arm.
5
4
Next, tighten the
swivel end of the
hose into the top
of the rotary head
until snug.
Inspect the rotary
head to make sure
the rotary arm spray
tips are a minimum
of 1” distance from
the surface being
cleaned.
6
1