Operator`s manual

19
storage/maintenance
Storage/Maintenance
DANGER
•
Never store an LP cylinder inside of a building, or near any other gas
or oil burning appliances.
NOTICE
•
Installation and repair of this heater should be done by a qualified
service person.
Always disconnect the heater from the LP cylinder before putting the
heater into storage. If for any reason the heater is to be stored indoors,
the tank MUST be disconnected from the LP cylinder, and the cylinder
stored outdoors in a well-ventilated area, out of the reach of children, and
in accordance with the Standard for Storage and Handling of Liquefied
Gases, ANSI/NFPA 58 - latest edition and Natural Gas and Propane
Installation Code, CSA 149.1. The plastic valve plug or valve cover
supplied with the cylinder must be re-installed on the valve to protect the
fitting from damage.
Always be sure to follow proper maintenance procedures. This should
include cleaning the inside the heater once a month, and checking the
spark gap at least once a heating season.