WHIRL-A-WAY OPERATIONS MANUAL www.bepressure.
16" - 24" SET-UP PROCEDURES T hank you for purchasing a BE Whirl-A-Way. We know that you had a choice in the purchase of a flat surface cleaner, and we would like to congratulate you on purchasing our very affordable and durable cleaner. 1 3 5 1 We recommend that you first fit the lower portion of the handle into the mounting brackets on the cover and secure with the bolts or the pins & clips.
OPERATING INSTRUCTIONS TROUBLE SHOOTING 1 Grease nipple 2 T he Surface Cleaning System you have purchased connects directly to your high pressure hose and pressure washer by means of quick couplers, operating to a maximum of 4000 PSI. Please note that the 12" Whirl-A-Way connects directly to a 1/4" quick connect coupler, operating to a maximum of 2500PSI. 3 Viton O-Ring Bypass Port This Whirl-a-Way is designed to operate with both hot & cold water pressure washers.
OPERATING INSTRUCTIONS surface being cleaned. While operating your surface cleaning system, please ensure that the nylon brush skirt remains in contact with the surface being cleaned. Do not operate on overhead surfaces. We strongly recommend that safety eye goggles, gloves and work boots be worn when operating this Whirl-a-Way. Keep hands and feet away from the high pressure, high speed rotating arm that is protected by the plastic cover.
PARTS BREAKDOWN 12" SETUP & APPLICATIONS BE-2000WAWS Description Bracket, Mounting Head 20" Rotary Head, 20" Mounting Blocks Hose, 62" x 3/8" Spray Gun Plug, 3/8" MNPT SS Handle, Upper 20" Handle, Lower 20" Hand Grip Brush Skirt, 20" Stainless Steel Castor Wheel Cover, Stainless Steel 20" Rotary Arm, 3-Way Nozzle, 25 Deg. 020 No# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Part # 85.791.002 85.790.004 85.419.117 85.238.057 85.202.115 85.300.105S 85.419.036 85.419.035 85.602.005 85.790.014S 85.790.009 85.419.
12" SETUP & APPLICATIONS PARTS BREAKDOWN RECOMMENDED APPLICATIONS BE-2200WAWG 3) Attach to longwand 9 A B C 5 6 13 Attatch to a longwand for cleaning hard to reach surfaces. Connect to longwand using the QC fittings on the longwand and Whirl-A-Way. Ensure the M22 hose is connected properly before use. 12 4 7 PARTS LIST 4) Use with a spray gun kit (optional kit #85.400.066) A B C D The 12" Whirl-A-Way is equipped for use with an optional spray gun kit P/N#85.400.066).
PARTS BREAKDOWN PARTS BREAKDOWN BE-1800WAW BE-1200WAW 9 5 6 1 2 14 13 6 7 4 7 4 PARTS LIST No# 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Part # 85.791.001 85.790.006 85.419.116 85.238.057 85.202.115 85.300.105 85.419.041 85.419.040 85.602.005 85.790.007 85.419.023 85.419.019 85.791.007 85.225.
PARTS LIST BE-1600WAW No# 1 2 3 4 5 6 7 8 9 10 11 12 13 Part # 85.791.003 85.790.004 85.419.116 85.238.057 85.202.017 85.300.105 85.419.044 85.419.042 85.602.005 85.790.012 85.419.021 85.791.009 85.225.025 Description Bracket, Mounting Head 16" & 20" Rotary Head, 16" Mounting Blocks Hose, 62" x 3/8" Spray Gun Plug, 3/8" MNPT Handle, Upper 16" Handle, Lower 16" Hand Grip Brush Skirt, 16" Cover, Polypropylene 16" Rotary Arm, For 16" Nozzle, 25 Deg.
