User's Manual

ManualsBrandsBEA ManualsElectronicsWireless door activation / sequencing device

75.5858.02 900 MHZ INDUSTRIAL 20160205 Page 1 of 4

900 MHZ RECEIVER & INDUSTRIAL TRANSMITTERS

Digital transmitters and receiver with

frequency hopping, sequencing and

extended hold functionality

(US version)

ENGLISH

1. receiver (10RD900)

2. antenna wire

3. blue activation LED

4. red learn LED

5. tri-color signal strength LED

6. DIP switches

7. no-delay learn button

8. delay learn button

9. delay learn potentiometer

10. transmitter

HAND HELD TRANSMITTERS

DESCRIPTION

4 BUTTON3 BUTTON2 BUTTON

IMPORTANT:

This product is NOT intended for use directly with Magnetic Locks or Electric Strikes.

Contact BEA Technical Support for further information.

1 BUTTON

Summary of content (4 pages)

PAGE 1
Digital transmitters and receiver with frequency hopping, sequencing and extended hold functionality (US version) DESCRIPTION 3 4 2 5 10 1 6 8 1. 2. 3. 4. 5. 9 7 receiver (10RD900) antenna wire blue activation LED red learn LED tri-color signal strength LED 6. 7. 8. 9. 10.
PAGE 2
PRECAUTIONS qq Shut off all power going to header before attempting any wiring procedures. qq Maintain a clean & safe environment when working in public areas. qq Constantly be aware of pedestrian traffic around the door area. qq Always stop pedestrian traffic through the doorway when performing tests that may result in unexpected reactions by the door. qq ESD (electrostatic discharge): Circuit boards are vulnerable to damage by electrostatic discharge.
PAGE 3
Removing Transmitters Single Transmitter 1 All Transmitters 2 1 x2 Press BOTH learn buttons until red LED flashes once (~2 s). Press transmiter TWICE within 10 seconds. Press BOTH learn buttons until blue LED illuminates (~10 s). Battery Replacement Handheld (TD900INDHHx) 1 2 3V 3V Remove back three (3) screws and disassemble. Replace two (2) 3V (CR2032) batteries observing polarity and reassemble.
PAGE 4
PLEASE KEEP FOR FURTHER USE – DESIGNED FOR COLOR PRINTING TECHNICAL SPECIFICATIONS Frequency: 908-918 MHz (frequency hopping) Emitted radio power: -25 dBm (TX) Power consumption: 13 mA (Transmitter) 40mA (Receiver) Supply voltage: 12-24 VAC/DC Contact rating: 1.0 A @ 30 VDC 0.5 A @ 125 VAC 0.3 A @ 60 VDC Temperature range: 14°F to 131°F (-10°C to 55°C) Programmable units per receiver: 74 LEDs: red (receiver learn) blue (relay activation) tri-color (signal strength) Dimensions: 2.