Inc Mounting Post User's Guide

ManualsBrandsBEA ManualsDoorBollards 10PBDGP1

2 Specications

BOLLARD MOUNTING POST

USER’S GUIDE

MOUNTING POST FOR PUSHPLATES

1 Description

The Bollard (Black-10BOLLARDBLK, Bronze-10BOLLARDBRZ & Silver-10BOLLARDSLV) is used for mounting pushplates that activate automatic

doors. It will accept BEA’s 4 ½” Square Pushplate, 4 ¾” Square Pushplate, 4 ¾” Panther Pushplate, Dual Vestibule Pushplate and 4 ½” Round

Pushplate. The post is made of durable carbon steel and the mounting bracket is made of stainless steel for strength. It can be mounted on either

existing concrete or newly poured concrete.

DESCRIPTION SPECIFICATION

Dimensions (with cap attached) 41 ½”H x 6 ¼” W x 4 ¼”D

Material

• Post

• Cap

• Mounting Bracket

Powder-Coated (Inside and Out) Carbon Steel

UV-Resistant ABS Plastic

Stainless Steel

Pushplate Options 4 ½” Square Pushplate, 4 ¾” Square Pushplate, 4 ¾” Square Panther Pushplate, Dual Vestibule Pushplate

and 4 ½” Round Pushplate

Weight 35 lbs (16 kilos)

Color Black, Bronze, Silver

Mounting Hardware L-anchor, Expansion Anchor, Split Washer and Nut (Included)

PLASTIC CAP

TRANSMITTER MOUNTING TRAY (HIDDEN)

NOT USED WITH PANTHER APPLICATION

PUSHPLATE MOUNTING BOX (HIDDEN)

PUSHPLATE (NOT INCLUDED)

WILL ACCEPT:

4 1/2” SQUARE PUSHPLATE

(10PBS45X)

4 3/4” SQUARE PUSHPLATE

(10PBS, 10PBS1, 10PBS10)

4 3/4” SQUARE PANTHER PUSHPLATE

(10EMSQ475X)

DUAL VESTIBULE PUSHPLATE

(10PBDGP1)

4 1/2” ROUND PUSHPLATE

(10PBR45X)

POST ASSEMBLY

POST MOUNTING BRACKET (HIDDEN)

POST MOUNTING SCREWS (4)

CAP MOUNTING SCREWS (3)

75.0131.05 20080606 Page 1 of 4

Summary of content (4 pages)

PAGE 1
BOLLARD MOUNTING POST USER’S GUIDE MOUNTING POST FOR PUSHPLATES 1 Description The Bollard (Black-10BOLLARDBLK, Bronze-10BOLLARDBRZ & Silver-10BOLLARDSLV) is used for mounting pushplates that activate automatic doors. It will accept BEA’s 4 ½” Square Pushplate, 4 ¾” Square Pushplate, 4 ¾” Panther Pushplate, Dual Vestibule Pushplate and 4 ½” Round Pushplate. The post is made of durable carbon steel and the mounting bracket is made of stainless steel for strength.
PAGE 2
3 Precautions  Shut off all power before attempting any wiring procedures.  Maintain a clean & safe environment when working in public areas.  Constantly be aware of pedestrian traffic around the door area.  Always stop pedestrian traffic through the doorway when performing tests that may result in unexpected reactions by the door.  Always check placement of all wiring before powering up to insure moving door parts will not catch any wires and cause damage to equipment.
PAGE 3
5 Installation (Continued) 3 Attach Mounting Bracket Using ‘L’ Shaped Anchors - New Concrete 1” EXPOSED 6” 1. Pour concrete at least 6 inches deep. 4 2. Insert anchors into curing concrete. Leave at least 1 inch exposed. 3. Once concrete has cured attach anchor and tighten nuts onto mounting bracket. Attach Post to Mounting Bracket 1. Align post to mounting bracket and attach post to mounting bracket with four post mounting screws.
PAGE 4
5 Installation (Continued) 6 Attach Transmitter ATTACH TRANSMITTER HERE TRANSMITTER MOUNTING TRAY ATTACH TO PUSHPLATE NOTE: PANTHER PUSHPLATES DO NOT REQUIRE A TRANSMITTER. CAUTION: IF THE TRANSMITTER IS ALLOWED TO HANG DOWN INSIDE THE BOLLARD, ERRATIC OPERATION MAY OCCUR. 1. If using the transmitter for this application, attach transmitter to mounting tray with velcro pad included in the package. Hardwired systems do not require this step. 2.