Inc. Microwave Contactless Switch for Automatic Doors User's Guide

ManualsBrandsBEA ManualsSwitchMS-08

2 Speciﬁ cations

MS-08 MAGIC SWITCH

USER’S GUIDE

MICROWAVE CONTACTLESS SWITCH FOR AUTOMATIC DOORS

1 Description

DESCRIPTION SPECIFICATION

Technology Microwave motion sensor

Radiated Frequency 24.125 GHz

Radiated Power Density 5 mW/cm²

Supply voltage 12 to 24VAC ± 10%

12 to 24VDC +30% / -10%

Supply Frequency 50 to 60Hz

Power Consumption < 1.5W

Output

Relay contact rating (max voltage)

Relay contact rating (max current)

Max switching power

Relay with switch-over contact (voltage free)

60 VDC/ 125 VAC

1A (resistive)

30W (DC)/ 60VA (AC)

Detection Range 4” to 24” (adjustable)

Detection Mode Motion (bidirectional)

Output Hold Time 0.5s (in pulsed mode)

Temperature Range -4°F to + 131°F

Immunity Immune to electrical and radio frequency interference

Weight 0.34 lbs.

Material ASA, Nylon, PC

Certiﬁ cation Electromagnetic compatibility (EMC) according to 2004/108/EC

FCC: G9B-MS08

IC: 4680A-MS08

75.5265.01 20071031 Page 1 of 3

Screw

Faceplate

Microwave

Motion

Sensor

Adapter Ring

Screw

Faceplate

Screws

DOUBLE GANGSINGLE GANG

Microwave

Motion

Sensor

Screws

MS-08 MAGIC SWITCH

(10MS08U)

Summary of content (3 pages)

PAGE 1
MS-08 MAGIC SWITCH USER’S GUIDE MICROWAVE CONTACTLESS SWITCH FOR AUTOMATIC DOORS 1 Description Screw Microwave Motion Sensor Screw Screws Microwave Motion Sensor Screws Adapter Ring Faceplate Faceplate SINGLE GANG DOUBLE GANG MS-08 MAGIC SWITCH (10MS08U) 2 Specifications DESCRIPTION SPECIFICATION Technology Microwave motion sensor Radiated Frequency 24.
PAGE 2
3 Precautions Shut off all power going to wall outlet before attempting any wiring procedures. Maintain a clean & safe environment when working in public areas. Constantly be aware of pedestrian traffic around the door area. Always stop pedestrian traffic through the doorway when performing tests that may result in unexpected reactions by the door. ESD electrostatic discharge: Circuit boards are vulnerable to damage by electrostatic discharge.
PAGE 3
5 Installation and Wiring (Continued) 3 Setup Toggle Mode Pot 4” 3 Output Mode Switch 24” 4” Pulse Mode 24” MS-08 1. Adjust unit to desired setup. Two adjustments can be made to the sensor. The Potentiometer is used to adjust the size of the units’ sensing field and the Output Mode switch is used to select Toggle or Pulse mode. 2. Rotate potentiometer clockwise to increase the sensing field. It may be adjusted from 4” to 24”. Sensing Filed 2.