Technical data

Specifying a Security Realm
Administration Guide 14-9
4. Click Create.
5. Configure and enable the ACL cache by defining values for the attributes shown
on the ACL tab in the Caching Realm Configuration window.
The following table describes the attributes you set on the ACL tab.
6. To save your changes, click the Apply button.
Basic Realm Name of the class for the alternate security
realm or custom security realm to be used
with the Caching realm. The names of the
configured realms appear on the pull-down
menu.
Case Sensitive Cache Defines whether the specified security realm
is case-sensitive. By default, this attribute is
enabled: the realm is case-sensitive. To use a
realm that is not case-sensitive (such as the
Windows NT and LDAP security realms),
you must disable this attribute.
Table 14-3 ACL Cache Attributes
Attribute Description
Enable Cache Option for enabling the ACL cache.
ACL Cache Size Maximum number of ACL lookups to
cache. This attribute should be a prime
number for best lookup performance. The
default is 211.
ACL Cache Positive TTL Number of seconds to retain the results of
a successful lookup. The default is 60
seconds.
ACL Cache Negative TTL Number of seconds to retain the results of
an unsuccessful lookup. The default is 10
seconds.
Attribute Description