Operating instructions

18
EverLite™ 6 Operating Instructions
1. Beachcomber Mode A - Light will sequence from
Red, to Green, to Blue continuously. Press the
light button once to start the ‘Beachcomber
Mode A’. Light will stay on each solid color
for three seconds. The color will blend with
the next color for four seconds before the
next color becomes a solid. To turn off, press
button once. *
2. Freeze Mode - As it cycles through the
‘Beachcomber Mode A’ , the light can be frozen on
any solid or blended color. Choose a color, and
then touch the button twice (off, then on)
within four seconds to switch to ‘Freeze Mode’.
To turn off, press button once.
3. Pulse Mode -
This is a random cycling mode,
which imitates the soothing rhythm of a heartbeat.
When in the ‘Freeze Mode’, touch the button
twice (off, then on) within four seconds
to switch to ‘Pulse Mode’. To turn off, press
button once.
4. White Mode - This mode recreates natural white
light. When in the ‘Pulse Mode’, touch the
button twice (off, then on) within four
seconds to switch to ‘White Mode’. To turn off,
press button once.
5. Beachcomber Mode B - All lights above waterline
are turned on, while all underwater lights are off.
When in the ‘White Mode’, touch the button
twice (off, then on) within four seconds to
switch to ‘Beachcomber Mode B’. To turn off,
press button once.
6. Beachcomber Mode C - All lights below
waterline are turned on, while all lights above
water are off. When in the ‘Beachcomber Mode
B’, touch the button twice (off, then on)
within four seconds to switch to ‘Beachcomber
Mode C’. To turn off, press button once.
* Note: If the light is left off for more than ten seconds, it will
revert back to ‘Beachcomber Mode A’ when switched back on.
Hot Tub Care and Maintenance
CLEANING OF THE ACRYLIC SURFACE
The acrylic surface is very easy to maintain and
care for. Use Tub Clean to remove water level scum
lines with warm water and a damp cloth; wipe
down, avoiding contact with the water as Tub
Clean can cause foaming.
HEATSHIELD AND STEP TOPS
As with any vinyl product that is exposed to the
weather, the better the care, the longer it will
last. Use a mild dish soap solution to remove
dirt on the Heatshield and then treat the vinyl
by applying Cover All as per the label. Avoid
application in the hot sun.
HOT TUB CABINETRY AND STEPS
The cabinet and step of your hot tub is made
from a synthetic plastic called Enviroskirt™.
If dirty, simply wipe down with a mild soap
solution and rinse well. If your hot tub cabinet
is natural cedar and you want to keep it looking
new, use Beachcomber’s “Nu Wood Stain”
Clear once a year. If the cedar is weathered
some, use Nu Wood Natural or Twilight to
bring back the color. Prior sanding with 100
grit sandpaper may be necessary if weathering
is advanced.
NEVER USE A CLEANER THAT CONTAINS
AMMONIA. THIS COULD DAMAGE YOUR
ACRYLIC SURFACE. AVOID LEAVING THE HOT TUB EMPTY
AND THE ACRYLIC EXPOSED TO HOT SUN. ALWAYS PUT THE
HEATSHIELD BACK ON THE HOT TUB WHEN IT IS NOT IN
USE.
WARNING
Z O N E D M O D E
Z O N E D M O D E
NOTE:
POINTS 1
THROUGH
4 APPLY TO
EVERLITE 4.
THE EVERLITE 6
INCLUDES ALL
SIX POINTS.