Specifications

MOUNTING STEP BRACKETS ON
PROTECT EQUIPPED HOT TUBS
All screws are pre-installed from the
factory for mounting your Protec safety
step to your hot tub. The brackets to
mount the step to the hot tub are factory
installed inside the step walls, and are able
to slide freely from side to side.
To install, line up the safety step to the
wall of the hot tub. Bend the brackets out
to match the holes for the screws, and
simply use the Allen key provided to screw
the 20 mm bolts into the holes to secure
the step to the hot tub.
Your step must be secured to your hot tub
at all times, for maximum safety:
1 - 10 Installing your Beachcomber Hot Tub
Hardware is installed
on both sides of your
safety step.