Specifications

Caring for your Beachcomber Investment 4 - 2
A SPECIAL NOTE ABOUT HEATSHIELDS
When shocking your Beachcomber Hot
Tub, we recommend that you open one
side of your cover to allow your sanitizer
to oxidize and gas off. Doing this will help
to protect the underside of your cover, and
it will allow your sanitizer to clean your
hot tub water.
CARING FOR YOUR HOT TUB’S
ACRYLIC SURFACE
Your Beachcomber Hot Tub is built with
Acuralux Acrylic. It will stand the test of
time - it’s tough and extremely durable. It’s
colorfast properties will make it one of the
toughest surfaces in your home! There is
very little maintenance required to keep
your hot tub Acuralux surface clean and
new looking. When you drain your hot tub,
wipe the surface down with Tub Clean.
About 8 to 10 drops on a damp, clean
cloth or chamois per wall would be
sufficient. You can also use Tub Clean
while your hot tub is full; after a heavy
usage period, you can clean the water line
with a soft sponge and a few drops of Tub
Clean. Be careful not to come into contact
with the water.
WARNING
This acrylic spa shell is made of a high
quality impact thermoplastic.
Never leave your hot tub in the sunlight
with the cover off for an extended period
of time (longer than a normal twenty
minute soak). Damage to the hot tub’s
acrylic surface can occur. Overexposure to
sunlight will void your factory warranty.
Always leave your hot tub protected with
the cover on when you are not using the
hot tub.
WARNING
Be careful not to use glassware around
your hot tub. Breakage could cause injury
and damage to your hot tub surface.
Acrylic or plastic ware is generally
unbreakable and much safer than glass.