Specifications

7 - 1 Questions and Answers about your Beachcomber Hot Tub
QUESTIONS AND ANSWERS FOR THE
HOT TUB OWNER
How do we get our Beachcomber Hot Tub
into our backyard?
Your Beachcomber dealer will deliver your
hot tub to your yard. Prepare for your
delivery - clear the way of toys, bikes,
barbecues and wood piles. If you need
more information about your hot tub such
as weight and dimensions, check Section
9, “Details Reference Chart”. Your
Beachcomber Hot Tub is double wrapped
from the factory to protect it from any
damage during shipping.
How soon can we use our hot tub after
we fill it with water?
Your hot tub will probably need from 6-12
hours to heat to temperature after you fill
it with your garden hose. Once it’s hot,
your initial startup dose of hot tub
disinfectant will need to be applied. Again,
your Beachcomber dealer will be there to
walk you through that process of startup.
Never use your hot tub without the proper
levels of disinfectant (sanitizer).
How long can we stay in?
Once you are enjoying your soak, you will
find that the average time is about twenty
minutes. You can stay in longer by simply
sitting out on the lip of the hot tub. It’s
strong enough to support you and friends!
How do we know if there is enough water
in our hot tub?
Fill your hot tub so that the water comes
halfway up the skimmer (see diagram).
You can go higher than that, but never go
lower. A low water level can make your
skimmer gulp air, which can cause
problems in the motor and pump. Consult
page 9-1 for the correct gallons/liters for
your model of hot tub.
Correct water level. Your skimmer
opening should be no less than halfway
submerged for optimum performance.
How do we connect the electricity?
This is not a job that you can do yourself,
unless you are a licensed electrician. You
will need an electrical line to run from
your breaker box in your house to the hot
tub. Any qualified electrician can do this
job for you. The electrician will choose the
correct wire size and the breaker size for
your hot tub.