Specifications

Your Beachcomber Hot Tub Details 9 - 4
Knife Valve
The valve that allows the flow of water to
the hot tub. See Section 1 for diagrams of
their locations and operation.
Lift ‘n Store
Beachcomber’s exclusive cover remover.
An easy way to remove your hot tub cover.
Made from aluminum piping.
Light
The moodlight in a hot tub that provides
safer entry and exit. Activated by the
switch on the control panel.
Light Lens
Colored plastic lens covers that fit over the
hot tub light to create mood and
ambience.
Locking Tabs
Fittings on the heat shield that allow it to
be locked down. Prevents unsupervised
entry by children and keeps pets and other
animals out. See Section 2.
Massage Inserts
The threaded body or fixture that houses
one or more jets. Threads into WaterPort
TM
opening allowing interchangeability of
massage inserts. See Section 3.
Microfilter
Beachcomber's filtration system design in
the corner of each Beachcomber Hot Tub.
Removal for cleaning is safe and easy. See
Section 2.
Motor
The 240 Volt electric motor. The motor is
attached to a pump (also called a wet
end). Beachcomber also offers a 120 Volt
motor (see the chart in this section).
Nu-Wood
Product to restore, protect and enhance
the cedar cabinet on a hot tub for years to
come. Easily applied in a two-part process
with the brush supplied in the kit. See
Section 4.
O-Ring
Plastic ring on the back of the hot tub jets
to complete the seal. Once jets are seated
and installed, the O-ring helps keep the jet
in place and prevents water from backing
up into the air lines.
Ozone
A water purification supplement method
using Ozone gas. Gas is made by an
Ozone generator unit that can reduce your
sanitizer needs by up to 25%. Available as
an option on most Beachcomber Hot Tubs.
Pak
The hot tub electronic piece of equipment
including the motor, pump and immediate
piping. This is a non-serviceable
component. See your Beachcomber dealer
for servicing.
pH
Stands for “potential for hydrogen”. This
is the term used to describe the acid (low
pH) or alkalinity (high pH) condition of the
water. The ideal pH for bathing in a hot tub
is 7.5.