Operating instructions

EverLite™ 6 Operating Instructions
1. Beachcomber Mode A - Light will sequence from
Red, to Green, to Blue continuously. Press the
light button once to start the ‘Beachcomber
Mode A’. Light will stay on each solid color for three
seconds. The color will blend with the next color for four
seconds before the next color becomes a solid. To turn
off, press button once. *
2. Freeze Mode - As it cycles through the ‘Beachcomber
Mode A’ , the light can be frozen on any solid or blended
color. Choose a color, and then touch the button twice
(off, then on) within four seconds to switch to ‘Freeze
Mode’. To turn off, press button once.
3. Pulse Mode - This is a random cycling mode, which
imitates the soothing rhythm of a heartbeat. When in
the ‘Freeze Mode’, touch the button twice (off, then
on) within four seconds to switch to ‘Pulse Mode’. To
turn off, press button once.
4. White Mode - This mode recreates natural white light.
When in the ‘Pulse Mode’, touch the button twice
(off, then on) within four seconds to switch to ‘White
Mode’. To turn off, press button once.
5. Beachcomber Mode B - All lights above waterline,
(including Eclipse Lighting, and Waterfall Light), are
turned on, while all underwater lights are off. When in
the ‘White Mode’, touch the button twice (off, then on)
within four seconds to switch to ‘Beachcomber Mode
B’. To turn off, press button once.
6. Beachcomber Mode C - All lights below waterline
are turned on, while all lights above water, (including
Eclipse Lighting, and Waterfall Light), are off. When
in the ‘Beachcomber Mode B’, touch the button
twice (off, then on) within four seconds to switch to
‘Beachcomber Mode C’. To turn off, press button once.
* Note: If the light is left off for more than ten seconds, it will
revert back to ‘Beachcomber Mode A’ when switched back on.
Hot Tub Care and Maintenance
CLEANING OF THE ACRYLIC SURFACE
The acrylic surface is very easy to maintain and care for. Use
Tub Clean to remove water level scum lines with warm water
and a damp cloth; wipe down, avoiding contact with the water
as Tub Clean can cause foaming.
HEATSHIELD
As with any vinyl product that is exposed to the weather,
the better the care, the longer it will last. Use a mild dish
soap solution to remove dirt on the Heatshield and then
treat the vinyl by applying Cover All as per the label. Avoid
application in the hot sun.
HOT TUB CABINETRY AND STEPS
The cabinet and step of your hot tub is made from a
synthetic plastic called Enviroskirt™. If dirty, simply wipe
down with a mild soap solution and rinse well. If your
hot tub cabinet is natural cedar and you want to keep it
looking new, use Beachcomber’s “Nu Wood Stain” Clear
once a year. If the cedar is weathered some, use Nu Wood
Natural or Twilight to bring back the color. Prior sanding
with 100 grit sandpaper may be necessary if weathering
is advanced.
NEVER USE A CLEANER THAT CONTAINS
AMMONIA. THIS COULD DAMAGE YOUR
ACRYLIC SURFACE. DO NOT LEAVE THE HOT TUB EMPTY
AND THE ACRYLIC EXPOSED TO HOT SUN. ALWAYS PUT THE
HEATSHIELD BACK ON THE HOT TUB WHEN IT IS NOT IN USE.
WARNING
Z O N E D M O D E
Z O N E D M O D E
NOTE:
POINTS 1
THROUGH
4 APPLY TO
EVERLITE 4.
THE EVERLITE 6
INCLUDES ALL
SIX POINTS.
20