Assembly Instruction

ASSEMBLY AND INSTALLATION

INSTRUCTION

Please read carefully and save this instruction, as you

may need them at a later date.

CAUTION

Turn off the main power at the circuit breaker before installing the fixture,

in order to prevent possible shock. If you are unfamiliar with proper

electrical wiring connections, please consult of a qualified electrician

before installing

Installing Step:

Remove the fixture and the mounting package from the box and make sure that no parts

missing in the box.

1. Install bulbs: (Bulbs not including in the package)

(Please don’t exceed the maximum capacity that recommended on the Sockets)

2. Put the Glass Shade (2) and the Metal Ring (3) together onto the Metal Plate (1).

3. The Nipple（4）aim at the hole of the Metal ring (3) through it and use the Screw

Collar (4) thread them tightly, then use the Screw Collars aim at other holes and

thread them tightly.

INSTALLATION IS NOW COMPLETED.

SCREW COLLAR (5)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTION Please read carefully and save this instruction, as you may need them at a later date. CAUTION Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock. If you are unfamiliar with proper electrical wiring connections, please consult of a qualified electrician before installing Installing Step: Remove the fixture and the mounting package from the box and make sure that no parts missing in the box. 1.