ASSEMBLY INSTRUCTIONS LOUNGE CHAIR WITH CUSHION CUSTOMER SERVICE INFORMATION not return to the store. If any pieces are missing call our toll free number For faster service, have the style number handy when calling.
GENERAL INFORMATION & TIPS 1. Please read the assembly instructions prior to assembling the chair. 2. To avoid damage, assemble the chair on a non-abrasive surface such as carpet. 3. Make sure all bolts tightly fastened before the chair is used. 4. This chair is not for commercial use. Please make sure you have all parts before beginning assembly. Please wait until all steps are completed before tightening bolts. 1. A Phillips screwdriver is necessary for assembly. 7 . If's not included in hardware list.
STEP 1 Attach back support (B) into right and left side frames the matching holes. Secure using 2" bolts (D} into armrest and 1" bolts (E} into back legs. ** DO NOT TIGHTEN BOLTS YET. STEP STEP 3 Make sure all parts are correctly connected and tighten all bolts and screws completely using screwdriver. Tapping in the wooden caps (F) to cover bolts head using rubber mallet. Install the cushions. THE CHAIR IS NOW READY FOR USE.
MAINTENANCE Wood is a living material that continues to/rsépbiid to climate condition sine slier being made into a piece of furniture. Allen assembly rub the furniture with sol rag fo remove any residual dust. Wood is a aural material whose appearance will change when left outdoors, This product has been treated prior to leaving the factor. To clean, use mild soap and warm water, Do not use abrasive material, cleansers or bleach products. Dry thoroughly with softhearted.