Installation & Assembly

Hardware List

Hex Wrench

1 pc.

Head Cap Bolt

(short)

8 pcs. (+1 extra)

Small

Hex Wrench

1 pc.

Part List

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

Shelf

3 pcs.

Top

1 pc.

Side Frame

1 pc.

Side Frame

1 pc.

Spring Washer

12 pcs. (+1 extra)

Flat Washer

12 pcs. (+1 extra)

Head Cap Bolt

12 pcs. (+1 extra)

Tools required for assembly : Tools recommended for assembly :Phillips screwdriver Level

4 Tier Shelf

PAGE 1
4 Tier Shelf IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Top 1 pc. B. Side Frame 1 pc. C. Side Frame 1 pc. D. Shelf 3 pcs. Hardware List Hex Wrench 1 pc. Small Hex Wrench 1 pc.
PAGE 2
Assembly Instructions 2/2 IMPORTANT * Do not tighten up all the screws until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * After assembly, item must be level to work properly. Use the included adjustable levelers to level. STEP 1 Attach Side Frame (B) and (C) to Top (A) with Head Cap Bolt (short).