Installation & Assembly

Assembly Instructions 2/2

STEP 2

Attach Side Frame (B) and (C)

to Top (A) with Head Cap Bolt (short).

(See Figure 1)

STEP 1

IMPORTANT

* Do not tighten up all the screws until each part is properly assembled.

* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.

* After assembly, item must be level to work properly. Use the included adjustable levelers to level.

Figure 1

Head Cap Bolt

(short)

STEP 3

Attach Shelves (D) to unit

with Flat Washers, Spring

Washers and Head Cap Bolts.

(See Figure 2)

Figure 2

Figure 3

To level the unit, adjust the adjustable

levelers on the bottom of unit. (See Figure 3)

Note: Unit must be level to work properly.

Turn the unit over to its’ upright position.

Flat Washer

Spring Washer

Head Cap Bolt