Assembly Instructions

5
Step6
 Position assembled unit to desired location.
Adjust levelers on bottom unit the table is
stable.
 Place rocks (B) into the fire bowl. Ensure
rocks are not covering the ignition portion
of the burner.
 Place lid (A) over the top .The lid (A) must be
removed when the burner is in operation.
Wait until the unit cools completely before
replacing lid (A).
Step7:Attaching the metal sheet and the tube rim to the base tube
 Place the propane tank, not included, onto
the propane tank support (K). Secure the
tank by tightening the screw of the
propane tank support (K).
 Connect the hose and regulator to the
propane tank.
Note: Use a standard 20LB propane tank only.
Step8:Inserting the Sunshade into the base tube
 Open the igniter cover and place the AAA
battery, not included, into it. Then tighten
the igniter cover completely.
 Assembly is complete.
 WE RECOMMEND THAT YOU PERIODICALLY
TIGHTEN ALL BOLTS.