BENCH CAUTION: You must read this before you proceed. This Bench need a 2 Person Team to assemble. CAUTION : This Bench is NOT a TOY. Keep your child / children at bay in the process of assembly.
Before Beginning Assembly: No.
No. Picture Description Qty ① Screw (M7*70mm) 5 ② Screw (M7*60mm) 5 ③ Bolt (M6*70mm) 3 ④ Allen Key 2 OVER VIEW Backrest Panel (A) Right Arm Panel(B1) Left Arm Panel(B2) Seat Panel (C) FRONT VIEW This Bench has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Bench, the above picture is to help you put the various parts into perspective. Please read through the instructions here below to familiarise the parts and steps before assembly.
Step 1 B1 B2 The best place to assemble this arm Bench is on a flat surface, eg., floor. Position Parts Backrest (A) and Seat Panel (C) as shown in picture above. Affix 1st Right Arm Panel (B1) ( facing skywards ), as shown above. Attach Arm Panel(B1) and Backrest Panel(A) by using 1 Screw(②)+Allen Key(④) Attach Arm Panel(B1) and Seat Panel(C) by using 2 Screws(①)+Allen Key(④) Then, flip chair to rest on 1st Arm(B1) so that 2nd Arm (B2) is now facing skywards.
Step 2 A Use Bolt (③) with Allen Key (④) to affix the top of the Backrest (A) to the Armrests on both sides as shown. DO NOT TIGHTEN BOLTS Step 3 A C BACK VIEW OF BENCH. Use Screw (②) and Allen Key (④) to attach Backrest Panel (A) and Seat Panel (C).
Step 4 Turn the Bench right side up. Inspect it and make sure all parts are adequately connected. Ensure all bolts and screws are fully locked into position and secured. The Bench is ready to be used. This Bench can only be used on a flat, level surface.
10 of 11
