User's Manual

Playback Monitoring

To monitor audio from the camera during playback you will need to use

another SC35 cable (not included). Connect this cable between the

phone out on the camera or external monitor (if it has this feature) and

the RTN Jack on the adapter. Set the MONITOR switch to RTN.

You can now play back the clip and hear the audio through your

headphones connected to PHONE output on the adapter.

Audio Bracketing

Audio Bracketing is a simply a technique of setting a secondary channel

at a lower level to use as a backup in case the primary channel gets

blown out from an overly hot signal. This can be used anytime a single

mono mic is being used with the adapter. It is very easy to do:

1) Plug the mic into any input which will be the primary channel.

2) Set the OUTPUT switch to M for MONO.

3) Adjust the primary channel level as usual.

4) Adjust the other secondary channel at a somewhat lower level

between 10 and 20dB.