Operating Guide
800 USG.4YOU
800 (874-4968)
usg.com
Manufactured for
United States Gypsum Company
550 West Adams Street
Chicago, IL 60661
J2113/rev. 4-15
© 2015 USG Corporation and/or
its aliates. All rights reserved.
Printed in U.S.A.
Material: Cross-fibered paper.
Coverage: Approx. 370 ft./1,000 ft.
2
(121 m/100 m
2
) gypsum panels.
Type Width in.
(mm)
Length ft.
(mm)
No. of Units/
Master Carton
Application
Roll 2-1/16 (52) 75 (22.8) 24 rolls Ideal for the occasional small drywall job, patching work, etc.
250 (76.2) 20 rolls Popular size for hand-application joint treatment.
Weighs approximately 1-1/4 lbs. (0.6 kg) per roll.
500 (152.4) 10 rolls Designed to fit easily into taping machines with fewer roll
changes. Weighs approximately 2-1/2 lbs. (1.2 kg) per roll so
machine balance is not disturbed.
Note: 1-31/32" (50 mm) width tape is available by special order. Contact your local USG sales oce or representative for
information on lead times and minimum quantity requirements.
Job Name
Contractor Date
PRODUCT DATA
PACKAGING
SUBMITTAL APPROVALS
PRODUCT INFORMATION
See usg.com for the most up-to-date product information.
TRADEMARKS
The trademarks USG, BEADEX, COVER COAT, FIRST COAT,
PLUS 3, MIDWEIGHT, SHEETROCK, TUFF-HIDE, IT'S YOUR
WORLD. BUILD IT., the USG logo, the design elements
and colors, and related marks are trademarks of USG
Corporation or its aliates.
NOTICE
We shall not be liable for incidental or consequential
damages, directly or indirectly sustained, nor for any loss
caused by application of these goods not in accordance with
current printed instruction or for other than the intended
use. Our liability is expressly limited to replacement of
defective goods. Any claim shall be deemed waived unless
made in writing to us within thirty (30) days from date it
was or reasonably should have been discovered.
NOTE
Products described here may not be available in all
geographic markets. Consult your USG Company sales
oce or representative for information.
SAFETY FIRST!
Follow good safety/industrial hygiene practices during
installation. Wear appropriate personal protective
equipment. Read SDS and literature before specification
and installation.