User manual

11
Getting started
The lithium battery of the mobile phone can be
immediately used after unpacking. A new battery,
is not fully charged, and performs best after
performing a full charge/discharge 3 times:
1. Plug the charger into the charger connector.
2. Plug the other end into an electrical outlet.
3. The phone may need several hours for reaching
a fully charge.
When your phone is power off, it might take a
few seconds to show charging display and it
shows charge complete when finished.
When your phone is power on, the battery icon
flickers when it starting charging and become
still with full bars in battery icon when finished.
Note: Charge the battery for at least 10 hours before using
the phone for the first time.
Switching the telephone on or off:
Make sure that you SIM card is in your mobile
phone and that the battery is charged.
1. Press the red key to switch the phone on.
2. If prompted, choose your language and press
OK.
3. If you have entered a PIN-code before, the
phone will ask for the code now. Enter the PIN-
code and confirm by pressing OK.
4. To turn off your phone, press and hold the red
key for two seconds.
If you don’t insert a SIM card, your phone shows
Insert SIM. None of the functions related to SIM