Vacuum Cleaner User Manual

OWNER’S MANUAL

Important Safety Instructions

Read all instructions before using your

Built-in Vacuum Cleaning System.

WARNING - To reduce the risk of ﬁre,

electrical shock or injury:

• Disconnect power units electrical

plug before servicing.

• Do not use outdoors or on wet

surfaces.

• Do not allow to be used as a toy.

Close attention is necessary when

used by or near children.

• Use only as described in this

manual. Use only manufacturer’s

recommended attachments.

• Do not handle hose, outlets, or

unit with wet hands.

• Keep hair, loose clothing, ﬁngers,

and all parts of the body away

from the openings and moving

parts.

• Do not pick up anything that

is burning or smoking, such as

cigarettes, matches, or hot ashes.

• Do not use without dust bag and/or

ﬁlters in place, if required by power

unit.

• Use extra care when cleaning on

stairs.

• Do not use to pick up ﬂammable

or combustible liquids such as

gasoline or use in areas where they

may be present

• Do not store ﬂammable or

combustible product within three

(3) feet of power unit.

SAVE THESE INSTRUCTIONS!

PAGE 1
OWNER’S MANUAL Important Safety Instructions Read all instructions before using your Built-in Vacuum Cleaning System. WARNING - To reduce the risk of fire, electrical shock or injury: • Disconnect power units electrical plug before servicing. • Do not use outdoors or on wet surfaces. • Do not allow to be used as a toy. Close attention is necessary when used by or near children. • Use only as described in this manual. Use only manufacturer’s recommended attachments.
PAGE 2
To Operate: 1 Open the door and pull out the amount of hose you need. 3 Option 2 - Use the RF handle. Hold the switch in the “on” position until you hear the vacuum, and/or air flow. Then let go of the switch. (Note: You will feel the hose stop when you get to the end. If the hose comes completely out of the wall, simply reinsert the hose several inches back into the inlet.) 2 Place the locking mechanism into the locked position.
PAGE 3
TROUBLESHOOTING RF Handle battery replacement Pull out the battery casement. Once the battery lid has been raised, using thumb and index finger, pull the casement straight up until the entire battery is visible. Open the battery casement. Locate the battery casement just below the metallic nozzle at the front of the RF handle (the lid of the battery casement can be identified by a white outlined battery icon).