User's Manual

%($07HUUD,QVWDOODWLRQ8VHU0DQXDO

SIM PIN use
If your SIM card requires activation, follow
the instructions provided by your authorised
Inmarsat service provider.
Your SIM has a PIN which can be enabled to be
entered each time the terminal is powered and
registered. If you want to use this PIN for extra
security then follow one of the two methods
below during power-up to enter the SIM PIN and
allow the unit to register on the network:
SIM pin via dial keypad
Refer to page 55 with section “Security features
controlled by the SIM card” for details on how to
manager your SIM pin.
SIM pin via RJ11/POTS
1. Turn ON power to the Terra 800 terminal.
The signal LED will ash RED.
2. Lift the RJ11/POTS handset, and listen for
a PIN tone. (See “Types of tones on RJ11/
POTS” page 56).
3. Enter the PIN on the handset keypad,
followed by the # button.
4. Hang up the RJ11/POTS handset and wait
for the Terra 800 terminal to acquire lock
and register on network.
3. Enter the PUK on the handset keypad,
followed by the # button.
4. Hang up the RJ11/POTS handset and wait
for the Terra 800 terminal to acquire lock
and registration.
The terminal has now loaded a default PIN of
“8888” into the SIM. The Terra 800 terminal
has also DISABLED the SIM PIN requirement
on powering up of the terminal.
NOTE
If you require to change the SIM PIN from the
default PIN, please use Falcon
NOTE
Refer to page 55 for more information on “security
features controlled by the SIM card”.
Alternatively, the SIM PIN can be disabled so
that the terminal will automatically register.
Please use the Falcon application to perform
this SIM card conguration. The Falcon also
allows the SIM PIN to be changed, and the PUK
to be entered if the SIM is locked.
NOTE
If you enter the PIN incorrectly 3 times, the SIM
card locks, and you need to enter the PUK. You
must use the PUK code supplied by your service
provider to unlock the SIM. If you dont have a PUK
code please contact your service provider.
SIM PUK
If you have locked your SIM card, you can enter
the PUK and then reset the PIN via Falcon.
You must use the PUK code supplied by your
service provider to unlock the SIM.
Alternatively you can enter the PUK via the
RJ11/POTS handset:
1. Turn on power to the terminal. The signal
LED will ash RED.
2. Lift the RJ11/POTS handset, and listen for
a PUK tone. (See “Types of tones on RJ11/
POTS” page 56).