User's Manual


NOTE
Fixed number dialling, Call barring and Call divert
does not prevent emergency calling. Call barring
and Call divert cannot be active at the same time.
After making your selection, you will be prompted
to enter the phone number or voicemail to which
calls are to be diverted. Select Options to select a
number from your phonebook.
To cancel call divert, highlight that type of call in
the Call divert menu, select Options and select
Cancel. To cancel all call diverts, select Options
and select Cancel all forwarding. To check the
status of a call divert, highlight that type of
call in the Call divert menu, select Options and
select Check status.
Fixed number dialling (FND)
When Fixed number dialling is activated, the
user is limited to dialling or texting only numbers
stored in the FND list. The default setting is o.
Call Processing on RJ11/POTS Phone
Call processing is the ability for the terminal
to automatically prex a users dialled number
with the correct area or country code. This is
intended to allow for a simpler dialling process
for users who have not been trained to place a
call from a satellite Terminal.
Falcon will allow users to enable or disable this
feature. By default this feature will be disabled.
When this feature is disabled there will be no
alteration to dialled numbers on the
RJ11/POTS Phone.
WARNING
Phone number processing only applies to RJ11/
POTS handsets. It does not apply when dialling
directly from the Dial Keypad of the terminal.
When call processing is enabled the user will
have the following customizable parameters:
• Minimum Digits
• Country Code
• Area Code
• Leading Digit for Information numbers
• Leading Digit for Long Distance (STD)
• Dialling Emergency number
• Dialling Voicemail number
• Quick Dial
• Enable Auto Dial
For further details on these parameters, consult
the Falcon Manual.