User's Manual


'4510#.+5'&5'66+0)5
170&5X4+0)610'5#0&241(+.'5
Your current sound prole is always displayed in
the status bar of the main screen, and can also
be accessed via Info.
To change your terminal’s sound prole, select
Menu > Proles, and highlight the one you want
and press the centre selection key. There are
four sound proles:
• General – for everyday use
• Silent – no vibration or sound
• Loud – for noisy environments
You can customise any of these proles by
highlighting it, selecting Options and selecting
Personalise. This allows you to change the
following aspects of the sound prole:
• Alert volume – sound level
• Keypad volume – sound level when a
key is pressed
• Alert ring mode – constant, ring once,
beep, silent or increasing volume
• Ringtone – the sound your Terminal makes
when it receives a call
• Key sound – the sound your Terminal
makes when a key is pressed
may be set to 0. This is the default for silent.
To change the ringtone volume, select Back to
return to Proles. Highlight Alert volume and
press Select.
Allocating a unique ringtone to callers
You can allocate a specific ringtone to a
contact. Regardless of the active profile,
the allocated ringtone will be used for the
specified caller, but the alert volume of the
active profile will be respected.
Highlight the desired contact entry in your
Phonebook or SIM contacts and press the
centre selection key or select Options > Open.
Highlight the relevant contact detail and select
Options > Assign ringtone. From the list of
available ringtones, highlight your preference
and press Select. The name of the ringtone will
be displayed under the contact detail specied.
To remove an associated ringtone, open the
contact entry, highlight the ringtone and select
Options > Remove ringtone.
• Message alert – the sound your Terminal
makes when it receives a text message
Highlight the setting you would like to
change, press the left or centre selection key,
use the navigation keys to alter the setting
and press Select.
To restore the default settings for a sound
prole, highlight the prole, select Options >
Reset to default.
Selecting a ringtone
Each prole can play one of 8 ringtones to notify
you of an incoming call.
Select Menu > Proles and highlight the
appropriate prole. Select Options > Personalise
> Ringtone from the list and press Select or
the centre selection key. The current ringtone
for the prole is played and highlighted in the
list. Use the navigation keys to highlight and
hear the other ringtone les available. Press
Select or the centre selection key to specify the
highlighted ringtone.
If no sound is heard when you highlight a
ringtone, the Alert volume for your prole