User's Manual

%($07HUUD,QVWDOODWLRQ8VHU0DQXDO

Setting writing language
Select Menu > Settings > Language > Writing
language. Select the desired language from
the list and press OK.
Setting predictive text
The predictive text setting is used to set the text
editing mode for composing messages. Select
Menu > Settings > Language > Predictive text.
Select Available or Hidden. The default setting
is available. See “Using predictive text entry” on
page 40 for more details.
Setting Terminal and writing language
The display and writing language of the
terminal can be changed by selecting Menu
> Settings > Language. Highlight any of the
following options and press Select:
• Terminal language — to set the display
language of the Terminal
• Writing language — to set the texting
language of the Terminal
• Predictive text — to set the text editing
mode for composing messages
'66+0)'4/+0#..#0)7#)'
The rst time the terminal is powered ON, you
will be prompted to select the display language.
You can change this at any time. Select Menu
> Settings > Language > Phone language,
highlight the desired language and press the
left or centre selection keys.
If you do not understand your terminal’s current
language setting, follow these directions to
navigate to the terminal language menu.
• Press the red key to return to the main
screen
• Press the left selection key to go to the
menu screen
• Press the down navigation key twice to
highlight the Settings icon
• Press the centre selection key to open
Settings
• Press the down navigation key twice to
highlight the Language icon and press the
centre selection key
• Press the centre selection key and use the
navigation keys to highlight the correct
language and press the centre selection
key again to change the Terminal’s
language