User's Manual



'66+0)&#6'#0&6+/'
Your terminal automatically receives UTC time
from GPS satellites. The rst time you use your
terminal, you will be prompted to select a
language from the list, followed by the option
to select your local time. When completed, local
time will be displayed on the status bar.
You will need to reset the time when you travel
to dierent time zones. The Date and time menu
lets you change the date and time format.
Setting the time
Select Menu > Extras > Date and time > Time
settings. Enter your locations time.
Setting the date
Select Menu > Extras > Date and time > Date
settings. Enter your todays date.

7561/+5+0)&+52.#;5'66+0)5
Lighting the keypad and screen
The backlights for the screen and keypad can be
controlled by going to select Menu > Settings >
Display. Select any one of the following options
and press Select to save your changes.
• Brightness – to set the brightness of the
screen
• Screen light – to set the duration for
screen backlights
• Keypad light – to set the duration for
keypad backlight
• Screen standby – to set the duration for the
screen backlights after the last keystroke
Lighting the function keypad
When out of a call press UP and Down buttons
simultaneously for one second to enter the
LED brightness change mode. All LED’s will
change to WHITE and a single beep will sound
when entering brightness change mode. Press
UP and DOWN arrows to vary intensity. Mode
will automatically exit 5 seconds after the last
button press. A short double beep will sound
when exiting change mode.

'66+0)6*'6+/'<10'
You may wish to change the local time zone on
your terminal if you move to a new location or if
your terminal is not displaying the correct time
zone. You may also wish to know the time in
another location, eg. your head oce.
Setting the local time zone
Select Menu > Extras > World time. The world time
map appears. Select Options > Select > Local time
zone. Use the navigation keys to highlight the
required time zone and press Select.
Setting the remote time zone
Select Menu > Extras > World time. Select
Options > Select remote time zone. Use the
navigation keys to highlight the required time
zone and press Select.
Setting daylight saving time (DST)
Select Menu > Extras > World time. Select
Options and select from a list to enable/
disable local/remote DST. DST is displayed
as 0 or +1 on the world map.